Graham Field 9000APS service manual Recommended Maintenance and Inspection

Page 30

Zenith aps seRies

RECOMMENDED MAINTENANCE AND INSPECTION

}Maintenance Inspection of All Components (Receipt of shipment)

Make sure all parts/components are included (Please see page 9 - “Unpacking Your Bed”).

Check all bed components for obvious damage.

Inspect the Power Supply Cord for any cuts and/or damage.

Check to see all actuator cords are routed and connected properly to the control box.

}Electrical Inspection of Control Box (6 months)

Check the external power cord that plugs into the control box for any chafing cuts or wear.

Make sure all attaching hardware is securely tightened.

Check all electrical connections for any wear or fractures.

Check your external or mounted battery (see page 24) Replace if needed.

}Mechanical Inspection of Assemblies (6 months)

Inspect all welds on the sleeping surface, frame, and base assemblies for stress fractures.

Inspect all fasteners for wear and looseness.

IMPORTANT: Lubricate all pivot points, actuator/motor clevis pins, and control arm clevis pins as needed. White Lithium Grease is recommended.

}Mechanical Inspection of Casters & Pedal Locking Mechanism

(3 months)

Check the pedal locking mechanism to make sure it engages and disengages properly.

Check the bottom foot pads on the foot end casters, making sure they are clean of debris and undamaged. Replace if needed.

Check all casters to ensure that they roll properly and are unobstructed.

}Electrical Inspection of Pendant and Staff Control (6 months)

Check the pendant cord for any chafing, cuts, or wear.

Check all pendant functions . . .

PHead raises and lowers properly

PFoot raises and lowers properly

PEntire bed raises and lowers properly

PBed moves to Chair position properly

PBed moves to Trendelenberg and Reverse Trendelenberg positions properly

Check to make sure each button and associated function work properly (i.e. the head section raises when the Head Up button is activated).

}Electrical Inspection of Actuators/Motors (6 months)

Check the actuator/motor cords for any chafing, cuts, or wear.

Check the range of movement on all motors to ensure they do not bind in the Full Up and Full Down positions.

WARRANTY

-15 Years on Frame

-5 Years on Motors and Control Box (longest motor warranty in the industry)

-3 Years on Other Electronics

The warranties contained herein contain all the representation and warranties with respect to the subject matter of this document, and supersede all prior negotiations, agreements and understanding with respect thereto.

The recipient of this document hereby acknowledges and represents that it has not relied on any representation, assertion, guarantee, warranty, collateral contract or other assurance, except those set out in this document.

 

 

 

 

 

 

 

 

 

 

30

 

Basic American Medical Products, a division of GF Health Products, Inc.

www.grahamfield.com

999-0831-190A Service Manual

Image 30
Contents Instructions for USE Important Notice Basic American Medical ProductsZenith aps seRies Important Safety and Warning Information Operating ConditionsTypical APS 9000 BED Identification Labels With Grounded Electrical CableTypical SAFETY/WARNING BED Labels Entrapment & Compliance Information Zenith 9000 APS Mechanics Zenith 9000 APS ElectricalUnpacking Your BED Discard KeepFootboard Installation HEAD- and Footboard AssemblyHeadboard Installation HeadboardPlugging in the Footboard NURSE/STAFF Control Attaching the FootboardFOOT-END Retainer Installation Standard Mattress Retainer InstallationHead Retainer Installation Retainer PositionsWallsaver Standard Wireform Wallsaver InstallationWallsaver Assembly RemovalBracket Installation Wallsaver RemovalBED Operations APS PENDANT/HAND Controller Backlit PendantBED Operations NURSE/STAFF Control Panel Lock OUT Single FunctionsHead END BED Operations Chair PositionBED Operations CPR/HEART Position Foot END751/1%5 BED Operations TRENDELENBERG/REVERSE TrendelenbergAPS 9000 Series Electrical Components Linak OptionalBattery Backup Cable Ground Wire APS9000 Series Electrical Cabling StandardAPS9000 Series Electrical Cabling with Underbed Light Underbed Light Cable UBLMounted Battery Option Optional Pivot Assist BAR Installation & Operation Pivoting Assist BAR OperationOptional Trapeze Support Installation  Optional Battery Backup Replacement Configurations Troubleshooting Nothing Works no Power Troubleshooting Staff Control Blinking LightsNothing Works no Power Staff Control Works but Pendant Troubleshooting Pendant & Double T-CABLENothing on Staff Control Works but Pendant Works Hand Controller Function DOESN’TBED Looks Unlevel Hilo Motors are not in Sync Troubleshooting Motor Cables & Control BOXHEAD, FOOT, or HI/LO Function not Working Quick ReferenceTROUBLESHOOTING/REPLACING Your APS Staff Control Removing and Replacing the Staff Control AssemblyRecommended Maintenance and Inspection Electrical Inspection of Control Box 6 monthsSERVICE/REPLACEMENT Part Record Double T-CABLE SERVICE/REPLACEMENT Part Diagram Electronics SERVICE/REPLACEMENT Part Diagram Decking SERVICE/REPLACEMENT Part Diagram Main Frame Capping Capping on Arms & Legs Zenith aps seRies GF121699RevA12

9000APS specifications

The Graham Field 9000APS is a remarkable piece of medical equipment designed specifically for healthcare facilities and home care environments. This innovative product showcases the company's commitment to quality, functionality, and user-centric design in assistive technology.

One of the standout features of the 9000APS is its advanced mobility solution, making it an ideal choice for patients with limited mobility or those recovering from surgery. The chair is equipped with a lightweight aluminum frame that contributes to its overall robustness while ensuring ease of transport and maneuverability. The strong yet manageable design supports a wide range of user needs, offering both stability and comfort.

The 9000APS features an ergonomic design that prioritizes the user's comfort. It is outfitted with contoured seating and soft padded armrests, which provide a supportive experience during prolonged use. The chair's adjustable height feature further enhances comfort and accessibility, allowing caregivers to tailor the chair to meet specific needs, especially when transferring patients from different surfaces.

Additionally, this model includes a dual-action braking system that enhances safety. The brakes can be easily engaged by the caregiver, preventing any unintentional movement while the patient is seated. Safety is also indicative in the chair’s non-slip feet, which ensure that it remains stable on various floor surfaces, further promoting user confidence.

In terms of technology, the Graham Field 9000APS emphasizes ease of use. Its compact and foldable design makes it simple to store and transport. The integrated storage compartments provide caregivers with quick access to personal items or essential medical supplies, streamlining the overall care process.

The chair is also designed with hygiene in mind. The materials used are easy to clean and maintain, which is crucial in preventing infections and ensuring a sanitary environment for patients. The fabric is not only durable but also resistant to moisture and stains, making it ideal for various healthcare settings.

Overall, the Graham Field 9000APS combines comfort, safety, and practicality, making it an exceptional choice for both patients and caregivers. Its innovative features and thoughtful design underscore Graham Field’s commitment to improving the quality of life for individuals requiring mobility assistance, ultimately making it a valuable addition to any healthcare routine.