Graham Field 9000APS service manual TROUBLESHOOTING/REPLACING Your APS Staff Control

Page 29

Zenith aps seRies

TROUBLESHOOTING/REPLACING YOUR APS STAFF CONTROL

REMOVING AND REPLACING THE STAFF CONTROL ASSEMBLY

1.UNPLUG THE POWER CORD FROM THE WALL OUTLET.

2.Unscrew the four Phillips Screws (#1) that attach the Shroud (cable cover) to the footboard and set aside.

3.At the foot end of the bed, unscrew the retaining cap on the T-Cable (#3) and unplug the two cables.

6WDII&RQWURO $VVHPEO\

 

6WDII&RQWURO %HYHO

6FUHZV)RRW%RDUG

ZLWKFXWRXW

4.Unscrew the two remaining Phillips Screws (#2) from the inside of the footboard that attach the Staff Control Assembly bevel to the board. Set aside screws for later re-assembly.

5.Remove the OLD Staff Control Assembly and fish the old cable out through the large hole.

6.Feed the cable of the NEW Staff Control Assembly from the outside through the large hole and insert the bevel into the cutout on the outside of the footboard.

7.Secure the Staff Control by re-inserting the two Phillips Screws (#2) you removed in Step 4.

8.Re-position the Shroud on the inside of the footboard and secure with the four Phillips Screws (#1) you removed in Step 2.

9.Plug the T-Cable (#5) into the Staff Control Cable (#4), making sure the phone jack plug

is seated correctly into the Staff Control cable plug. Screw on the retaining cap (#3) to secure.

10.Run a Cable Tie through the large end hole on the right-hand footboard mounting tube.

11.Loop the excess Staff Control Cable. Run the cable tie around the cable and pull tight to secure. Cut off any excess Cable Tie.

 

6WDII&RQWURO %HYHO6FUHZV



6KURXG6FUHZV

 

 

 

(QGRI'RXEOH7&DEOH DWIRRWHQG*UH\ 7UXQVRQHLWKHU VLGHRI6HDW3DQ

IRUDWWDFKLQJ\RXU +DQG&RQWUROOHU

,03257$175XQD&DEOH 7LHWKURXJKWKHHQGKROHLQ WKHPRXQWLQJWXEHORRSWKH H[FHVVFDEOHUXQWKHWLH DURXQGFDEOHDQGSXOOWLJKW WRVHFXUH&XWRIIH[FHVV FDEOHWLH

)HPDOHHQG

RI6WDII&RQWURO &DEOH

/RFNLQJ (QG&DS

 

 

 

 

 

 

 

 

 

 

29

 

Basic American Medical Products, a division of GF Health Products, Inc.

www.grahamfield.com

999-0831-190A Service Manual

Image 29
Contents Instructions for USE Basic American Medical Products Important NoticeZenith aps seRies Operating Conditions Important Safety and Warning InformationWith Grounded Electrical Cable Typical APS 9000 BED Identification LabelsTypical SAFETY/WARNING BED Labels Entrapment & Compliance Information Zenith 9000 APS Electrical Zenith 9000 APS MechanicsDiscard Keep Unpacking Your BEDHeadboard Installation HEAD- and Footboard AssemblyFootboard Installation HeadboardAttaching the Footboard Plugging in the Footboard NURSE/STAFF ControlHead Retainer Installation Standard Mattress Retainer InstallationFOOT-END Retainer Installation Retainer PositionsWallsaver Assembly Standard Wireform Wallsaver InstallationWallsaver RemovalWallsaver Removal Bracket InstallationBacklit Pendant BED Operations APS PENDANT/HAND ControllerLock OUT Single Functions BED Operations NURSE/STAFF Control PanelBED Operations CPR/HEART Position BED Operations Chair PositionHead END Foot ENDBED Operations TRENDELENBERG/REVERSE Trendelenberg 751/1%5Optional APS 9000 Series Electrical Components LinakAPS9000 Series Electrical Cabling Standard Battery Backup Cable Ground WireUnderbed Light Cable UBL APS9000 Series Electrical Cabling with Underbed LightMounted Battery Option Pivoting Assist BAR Operation Optional Pivot Assist BAR Installation & Operation  Optional Trapeze Support InstallationOptional Battery Backup Replacement Configurations Nothing Works no Power Troubleshooting Nothing Works no PowerTroubleshooting Staff Control Blinking Lights Nothing on Staff Control Works but Pendant Works Troubleshooting Pendant & Double T-CABLEStaff Control Works but Pendant Hand Controller Function DOESN’THEAD, FOOT, or HI/LO Function not Working Troubleshooting Motor Cables & Control BOXBED Looks Unlevel Hilo Motors are not in Sync Quick ReferenceRemoving and Replacing the Staff Control Assembly TROUBLESHOOTING/REPLACING Your APS Staff ControlElectrical Inspection of Control Box 6 months Recommended Maintenance and InspectionSERVICE/REPLACEMENT Part Record Double T-CABLE SERVICE/REPLACEMENT Part Diagram Electronics SERVICE/REPLACEMENT Part Diagram Decking SERVICE/REPLACEMENT Part Diagram Main Frame Capping Capping on Arms & Legs Zenith aps seRies GF121699RevA12

9000APS specifications

The Graham Field 9000APS is a remarkable piece of medical equipment designed specifically for healthcare facilities and home care environments. This innovative product showcases the company's commitment to quality, functionality, and user-centric design in assistive technology.

One of the standout features of the 9000APS is its advanced mobility solution, making it an ideal choice for patients with limited mobility or those recovering from surgery. The chair is equipped with a lightweight aluminum frame that contributes to its overall robustness while ensuring ease of transport and maneuverability. The strong yet manageable design supports a wide range of user needs, offering both stability and comfort.

The 9000APS features an ergonomic design that prioritizes the user's comfort. It is outfitted with contoured seating and soft padded armrests, which provide a supportive experience during prolonged use. The chair's adjustable height feature further enhances comfort and accessibility, allowing caregivers to tailor the chair to meet specific needs, especially when transferring patients from different surfaces.

Additionally, this model includes a dual-action braking system that enhances safety. The brakes can be easily engaged by the caregiver, preventing any unintentional movement while the patient is seated. Safety is also indicative in the chair’s non-slip feet, which ensure that it remains stable on various floor surfaces, further promoting user confidence.

In terms of technology, the Graham Field 9000APS emphasizes ease of use. Its compact and foldable design makes it simple to store and transport. The integrated storage compartments provide caregivers with quick access to personal items or essential medical supplies, streamlining the overall care process.

The chair is also designed with hygiene in mind. The materials used are easy to clean and maintain, which is crucial in preventing infections and ensuring a sanitary environment for patients. The fabric is not only durable but also resistant to moisture and stains, making it ideal for various healthcare settings.

Overall, the Graham Field 9000APS combines comfort, safety, and practicality, making it an exceptional choice for both patients and caregivers. Its innovative features and thoughtful design underscore Graham Field’s commitment to improving the quality of life for individuals requiring mobility assistance, ultimately making it a valuable addition to any healthcare routine.