Toshiba Toshiba Network Camera quick start Assigning IP Address

Page 19

Assigning IP Address

1.Install the "Installation Wizard" under the Software Utility directory from the CD- ROM.

2.The program will analyze your network environment. After your network is analyzed, please click on the "Next" button to continue the program.

Installation

Wizard

3.The program searches for other Network Cameras on the same network.

4.After searching, the main installer window will pop up. Click on the MAC address of the appropriate device to connect to the Network Camera.

00-02-D1-71-42-70

169.254.0.99

IK-WR12A

0002D1714270

NOTE

•If "Installation Wizard" does not find the camera during the search, try turning off the wireless LAN of a PC.

•Installation Wizard can search the location of the Network Camera even though DHCP is not used on the network. In this scenario, assign the camera a static IP address because the IP address of the Network Camera has been assigned 169.254.*.* by default.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model IK-WR14A FCC USA-INFORMATION IntroductionTerms and Trademarks Table of Contents Important Safeguards Lightning Damage Requiring ServiceReplacement Parts Safety CheckField Installation Marking Do not shoot intense light Keep the camera installation away from video noiseCheck the ambient temperature and humidity Do not aim the camera at the sunAdministrators personal computer Setting the Network Camera EnvironmentPackage Contents Camera Base Dome Cover Cover screws Side Opening Cover Physical DescriptionIR LEDs Operating environment Hardware InstallationWaterproof Connector Ceiling and Wall mount Page Network Deployment Power over Ethernet PoEGeneral Connection without PoE Assigning IP Address Retrieving Images To adjust the viewing angle Adjusting the LensDome cover To adjust the zoom factor and focus range Adjusting the Zoom and FocusToshiba America Information SYSTEMS, INC
Related manuals
Manual 20 pages 23.97 Kb
Top Page Image Contents