Toshiba Toshiba Network Camera quick start Important Safeguards

Page 5

Important Safeguards

1. Read Instructions

Read all the safety and operating instructions before operating the product.

2. Retain Instructions

Retain the safety instructions and user's manual for future reference.

3. Warnings

Comply with all warnings on the product and in the user's manual.

4. Follow Instructions

Follow all operating and use instructions.

5. Cleaning

Disconnect this camera from the power supply before cleaning.

6. Attachments

Do not use attachments not recommended by the camera manufacturer as they may pose safety risks.

7. Accessories

Do not place this camera on an unstable cart, stand, tripod, bracket or table. The camera may fall, causing serious injury to a person, or serious damage to the product. Use only with stand, tripod,bracket,or table recommended by the manufacturer, or sold with the camera. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.

8. Ventilation

This camera should never be placed near or over a radiator or heat register. If this product is placed in a built-in installation, verify that there is proper ventilation so that the camera temperature operates within the recommended temperature range.

9. Power Sources

This camera should be operated only from the type of power source indicated on the information label. If you are not sure of the type of power supply at your location, consult your product dealer.

10. Power-Cord Protection

Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, screws and the point where they exit the product.

11. Installation

Install this camera on a secure part of the ceiling or wall. If installed on an unsecured location, the camera could fall causing injury and damage.

5

Image 5
Contents Model IK-WR14A FCC USA-INFORMATION IntroductionTerms and Trademarks Table of Contents Important Safeguards Replacement Parts Damage Requiring ServiceSafety Check LightningField Installation Marking Check the ambient temperature and humidity Keep the camera installation away from video noiseDo not aim the camera at the sun Do not shoot intense lightAdministrators personal computer Setting the Network Camera EnvironmentPackage Contents Camera Base Dome Cover Cover screws Side Opening Cover Physical DescriptionIR LEDs Operating environment Hardware InstallationWaterproof Connector Ceiling and Wall mount Page Network Deployment Power over Ethernet PoEGeneral Connection without PoE Assigning IP Address Retrieving Images To adjust the viewing angle Adjusting the LensDome cover To adjust the zoom factor and focus range Adjusting the Zoom and FocusToshiba America Information SYSTEMS, INC
Related manuals
Manual 20 pages 23.97 Kb