Toshiba pmn user manual Before you move the camera, disconnect cords and cables

Page 5

Safety Precautions (continued)

CAUTION

If you want to use the camera on an airplane, consult with the airline and follow their instructions.

Use of this camera is sometimes restricted due to potential radio interference.

Do not use the camera in humid, steamy, smoky or dusty places.

This might cause fire or electric shock.

Do not leave the camera in places where the temperature may rise significantly, such as inside a car.

This might adversely affect the case or the parts inside, resulting in fire.

Do not place or wrap the camera in cloth or blankets. This might cause heat to build up and deform the case, resulting in fire. Use the camera in a wellventilated place.

Before you move the camera, disconnect cords and cables.

Failure to do this might damage cords and cables, resulting in fire or electric shock.

Do not drop or subject the camera to strong impact.

This might cause fire, electric shock or malfunctions.

Before you carry out maintenance on the camera, remove the battery and AC adapter.

Leaving these attached might cause electric shock.

Remove the batteries and AC adapter if you plan not to use the camera for a long time.

This might cause fire.

Insert the battery paying careful attention to the polarity (+ or –) of the terminals.

Inserting the battery with its polarities inverted might cause fire and injury, or damage the surrounding areas.

CAUTION

Do not look at the sun through the camera viewfinder. This may cause injury of the eyes.

Do not use the flash close to anyone’s eyes.

This might cause temporary damage to the person’s eyesight.

Do not walk around with the camera swinging from the shoulder strap.

If you walk around with the camera hanging from your hand through the shoulder strap, the camera might bump into people or other objects, damaging the camera or causing an injury.

Before you store or dispose of used batteries insert them in their battery covers or tape the plus (+) and (–) terminals with insulating tape.

If stored or disposed of without doing this, the batteries may make contact with metal objects, resulting in fire or injury due to leaking of battery fluid, overheating or bursting of the battery.

Do not subject the LCD monitor to impact.

If the status display is impacted, the glass on the screen may be broken and internal fluid may leak.

If the internal fluid enters your eyes or sticks to your body or clothes, immediately rinse with fresh water. If the internal fluid enters your eyes, immediately consult a physician to receive treatment.

Consult your dealer regarding the internal cleaning of the camera once every two years.

If dust is allowed to accumulate inside the camera for a long time, this might result in fire or defects. Consult your dealer regarding the cleaning costs.

When connecting or disconnecting the power cord to and from the power outlet or the camera, grasp and pull on the connector plug. Pulling on the cord may cause internal breakage of the wires, resulting in fire or electric shock.

8

9

Image 5
Contents GB/F Installing the image software Your PC Using Your Camera Correctly Names of PartsWhite Balance Rotating ImagesGraphic Meaning Indication MeaningDo not use the camera in the bath or shower Do not use in areas near waterDo not disassemble, change or repair the camera Keep the batteries out of the reach of childrenDo not subject the LCD monitor to impact Before you move the camera, disconnect cords and cablesDo not drop or subject the camera to strong impact Using Your Camera Correctly Using Your Camera Correctly Using Your Camera Correctly Abbreviations Used In This Manual Flash mode button Macro/ Landscape mode buttonDisp button Mode select lever Self-timer LED redStrap lug Memory card door release Tripod socket Battery packCover Check the Contents Loading and Recharging the Battery PackBasic Preparations Recharging TimeLoading and Removing Memory Cards Write Protect SwitchRemoval Attaching the hand strapSet the mode select lever to SET Setting the DateTo confirm the new setting data, press the button Press the # buttonCamera Basics Using the LCD Monitor to Shoot Still PicturesUse the Digital Zoom for Even Greater Enlargements BeepHints for Holding the Camera Steady Precautions when Recording Using the LCD Monitor to Shoot Moving PicturesShutter Release Button Half-way Down Other UsesPrecaution when using the optical viewfinder Using the Optical Viewfinder to Shoot Still PicturesFunctions Shooting a Picture Using the FlashCamera Macro and Landscape Photography No display Normal modeOperation Macro/Landscape SelectionCombined Modes Using the Self-TimerPress the button and select the desired mode General Guidelines for Selecting Image Quality Setting Image Quality File CompressionWhite Balance Exposure CompensationSetting Details menu will disappear Adjusting the Preset ValueSetting Details menu Using Color Mode for B&W and Sepia Images Selecting the Focus Distance before Shooting Selected together with long exposures Increasing Exposure Sensitivity to 2xOther Applications Guideline for Light-Metering Selecting the Metering ModeSelect Digital Zoom Setting the REC Review Digital Zoom ON/OFFExample Other FunctionsFocus Lock Displaying Images on the LCD Monitor Image Playback BasicsPlaying Movies on the LCD Monitor Advanced Image Playback Delete Functions Press the T button Closeup Image PlaybackErasure Prevention Image Protect Function Multiple Image Display Index DisplayErasing Individual Images Erasing All Images Images can be rotated 90 to either right or left Rotating ImagesTo erase multiple images To end the slide show, press Digital Print Order Format Dpof SettingAutomatic Playback Slide Show Select Execute Trimming Adjusting the Image Size TrimmingTo Erase a Picture Viewing and Erasing the Trimmed ImageFormatting Memory Cards Camera Setup OptionsTurning the Electronic Tone ON/OFF Press the % or fi button to 3 Using the % or fi buttonDifference between Erasing and Formatting All Erase Format Single-PictureWhen Power Save is set to 1 MIN, 2 MIN or 3 MIN Selecting Auto Power-Off Power-Save FunctionDifference in Displays when Mode Lock is on and OFF Mode Lock ON/OFFEspañol using % or fi Selecting the Video Output ModeSelecting the Display Language FRANÇAIS, DEUTSCH, orBefore reset Recording Status Before and After Resetting File NumbersAfter reset Before reset After resetModes Returning Settings to their Default ValuesDATE, Video OUT and Language Changing the Display Color for the Setting Buttons Transferring Images to a Personal Computer CD-ROM Software Software and Hardware RequirementsWhen you are using Windows PC To install the driver Installing the USB DriverWhen you are using Macintosh To install the driver for Mac OSConnecting the USB Cable to your PC Installing the image softwareInstalling Image Expert Windows Installing Image Expert MacintoshOn a Macintosh computer Make sure that Viewing the Images on your PCOn a Windows computer You can To install Arcsoft PhotoBase for PalmStill images Moving images To use Arcsoft PhotoBaseOther Information Adjusting LCD Monitor BrightnessLCD Monitor Operations Turning the LCD Monitor ON/OFFSymptom Cause Remedy TroubleshootingPlay BackOther Symptom Cause Remedy PlayOpera TionSD Memory Card Handling Precautions Display SpecificationsInput/Output Battery/PowerFor customers in the U.S.A For customers in Canada

pmn specifications

The Toshiba PMN (Piezoceramic Material) is a highly advanced piezoelectric material designed for various applications across several fields, including consumer electronics, healthcare, and industrial automation. Recognized for its impressive characteristics, the Toshiba PMN material has garnered attention due to its superior performance, enabling innovations in sensor technology, actuators, and transducers.

One of the main features of Toshiba PMN is its exceptional piezoelectric response. This characteristic allows the material to generate electric charge in response to mechanical stress, making it ideal for applications such as pressure sensors and ultrasonic transducers. The high electromechanical coupling coefficient of PMN enables devices to achieve greater sensitivity and efficiency, enhancing the overall performance of the end products.

Toshiba PMN utilizes a unique crystal structure that contributes to its outstanding properties. The incorporation of lead magnesium niobate (PMN) into the piezoelectric matrix results in a high dielectric constant and reduced mechanical losses. This combination allows for better energy conversion and ensures reliable operation even in rigorous conditions. The material exhibits excellent temperature stability and resilience, which is crucial for applications requiring long-term reliability.

Another significant aspect of Toshiba PMN is its versatility in manufacturing processes. The material can be fabricated into various shapes and sizes, facilitating use in diverse applications, from small consumer electronics to large industrial machinery. Additionally, its adaptability allows for integration into advanced technologies, such as smart devices and medical equipment, where precise control and miniaturization are essential.

Furthermore, Toshiba PMN is at the forefront of research related to lead-free piezoelectric materials, aligning with global sustainability efforts. The exploration of eco-friendly alternatives without compromising performance showcases Toshiba's commitment to innovation while addressing environmental concerns.

In conclusion, Toshiba PMN stands out as a leading piezoelectric material that combines remarkable performance characteristics with manufacturing versatility. Its exceptional piezoelectric response, temperature stability, and compatibility with various applications make it a preferred choice for industries that demand precision and reliability. As technology continues to advance, Toshiba PMN is poised to play a critical role in shaping the future of sensing and actuation technologies.