Toshiba pmn user manual Symptom Cause Remedy Play, Other, Opera, Tion

Function	Symptom		Cause	Remedy
Play-	Image cannot be		The write protect	Release the SD memory
	rotated or set for		switch is set (SD	card’s write protect lock
back
	DPOF.		memory card).	(page 25).
	Image cannot be		The image is protected.	Release the image protect
	erased; “	”		function (page 63).
	mark appears.
	Image cannot be		Image data was	The image cannot be erased
	erased		recorded on a different	normally by the camera. The
Erasing			camera or device.	card can be reformatted to
				erase all images.
	The number of		The size of the erased	File size and number of
	images recordable		image file was very	pictures recordable differ
	didn’t change		small.	depending on the image
	when an image			quality mode and subject
	was erased.			conditions; not a malfunction.
	Can’t recharge		No lithium ion battery	Insert the battery pack into
	the camera.		pack is loaded.	the camera.
Recharg-	Can’t recharge		Ambient temperature is	Ambient temperature during
	the camera. Or it		too high or too low,	recharging should be
ing	is canceled		causing the charger’s	between +10° C and +30° C.
	midway through.		protect circuits to	(In practice, a range of +5° C
	Caution LED		operate and interrupt	- +40° C is possible, but the
	flashes slowly.		the recharging function.	recharging time may
				become somewhat longer).
	Nothing appears		Battery power is	Insert the lithium ion battery
	on the LCD		depleted, or no battery	pack into the camera and
	monitor.		pack is loaded.	recharge if necessary.
	Nothing appears		The auto-off function	Press the main power
Other	on the LCD		has operated to turn	switch again to turn power
	monitor.		power off (page 78).	ON.
	The camera feels		Large power consumption	This in itself is not a
	hot.		occurs during use of the	malfunction, but the
			LCD monitor; the camera	camera should be allowed
			may feel warm when the	to cool before continuing
			LCD monitor is used for a	use.
			long period of time.

104

Function	Symptom	Cause	Remedy
	Nothing appears	Battery power is	Replace the battery pack
	on the LCD	depleted, or no battery	with the charged one.
	monitor.	pack is loaded.
	The battery runs	The camera is used	Warm the battery in your
	out too soon.	under extremely low	pocket and attach it just
Other		temperature.	when you want to operate
			the camera.
		The terminal is dirty.	Wipe out the battery
			terminal with a dry, clean
			cloth.
		Battery life is over.	Replace the battery pack
			with a new one.
Play-	Images cannot	—	Contact the manufacturer
back	be replayed by		of the PC or the software.
	the PC.
	The camera can't	Battery power is	Use the AC adapter
	be connected to	depleted.	instead.
	the PC using
	USB cable.
		The power of the	Turn the power on.
		camera isn't on.
		USB cable isn't	Pull out the cable once
		connected properly.	from the camera, then
Opera-			connect it again. Make
			sure [PC MODE] is
tion			displayed on the LCD
			monitor of the camera (see
			page 95).
		Other USB ports on	Disconnect devices other
		the PC have been	than the keyboard and
		connected to other	mouse from the ports, and
		devices.	try again.
		The USB driver has	Install the USB driver (see
		not been installed yet.	pages 92 and 93).

105