Toshiba PDR-T20 instruction manual Handling the AC Adapter Correctly, AC adapter CEX0107A

Page 12

Handling the AC Adapter Correctly

GettingReady
TakingPhotographs
PlayingBack/Deleting	PhotographedImages
Connectingtothe	PC
OtherUseful	Information

Be sure to use only the specified AC adapter. Using a different AC adapter might cause the camera to malfunction.

Before using the AC adapter, carefully read and strictly observe the Safety Precautions (page 3) and the notes described below:

•Do not allow the connectors on the AC adapter to contact any other metal object because this might cause a short circuit.

•To connect the AC adapter, fully insert the plug on the AC adapter into the DC IN 5V terminal on the camera.

•When removing the AC adapter cable, turn the camera off, then disconnect the cable while holding its plug. Do not disconnect the cable by pulling the actual cable.

•Do not drop the AC adapter or subject it to strong impacts.

•Do not use the AC adapter in very hot and humid places.

•Do not insert the plug on the AC adapter while the battery is being used. Switch the camera off first.

•The AC adapter is for indoor use only.

•Do not connect the supplied AC adapter to a device other than this camera.

•The AC adapter may sometimes become warm during use. This does not designate malfunction.

•Buzzing noises may come form inside the camera. This does not designate malfunction.

•Do not use the AC adapter near a radio because it could interfere with the radio.

•If you remove the battery or AC adapter while the camera is in operation, the date may be lost from the memory. If this happens, reset the date.

Specifications

AC adapter (CEX0107A)

Input	:	100 to 240 V AC, 50/60 Hz
Rated output	:	5 V DC, 3 A
Operating temperature :		32°F (0°C) to +104°F (+40°C)
Storage temperature	:	–4°F (–20°C) to +149°F (+65°C)
Dimensions	:	40 mm x 30.5 mm x 94.2 mm (W x H x D)
Weight	:	Approx. 150 g

Important

•Use the power supply indicated on the supplied AC cord. When using power supply other than the displayed voltage in other countries/region, please purchase the AC cord that applies to the standard of the country/region.

•The AC adapter can be used with 100V to 240V.

12

Image 12

Contents PDR-T20 ReadyGetting PhotographsTakingGraphic symbol definitions Graphic symbolExemption Clauses Indication definitionsReady GettingAbout the AC adapter About battery GettingReadyTaking Contents Cleaning the Camera Avoid using or storing the camera in the following placesAbout recycling of rechargeable battery Handling the CameraSoftware version upgrade Trademark informationCopyright Notice About Battery Use When Not Using the Battery for a Long TimeCharging the Battery SpecificationsHandling the AC Adapter Correctly AC adapter CEX0107AWrite Protection Write protectionState Names of the Parts Indicator Enter/Direction button IndicatorMode Icon Description Display key pages 29Menu key pages 36 Erase key pages 47You can operate the touch panel using the following methods Setting up the touch panelLCD monitor Direction button On the cameraOpen the battery/SD card cover Close the battery/SD card coverInsert the SD card in the correct orientation shown Before startingInsert the battery in the correct orientation shown To remove the batteryBattery lock lever Charging the Battery About battery wear Using the battery efficientlyBattery Wear DisplayTurning the Power On/Off Turning the power onSlide the Power switch in the arrow direction To turn the power offOpening the lens cover Closing the lens coverSlide the lens cover in the arrow direction Slightly slide the lens cover in the arrow directionSetting the Date and Time Tap the keyTap the icon Tap IconSelect the item, then tap the or icon Upper-arrow iconOK icon Return iconUsing the lens cover Using the mode buttonTaking Photographs Turn the power on PhotographsTaking Tap the key in the photography mode File size per imageTakingPhotographs Selecting the Scene Mode Tap the key in the photography modeCurrently set scene mode icon Display keyDetails about the scene mode Selecting the Flash Mode Tapping this restores the Display screenTap the icon to be selected List of flash icons is displayedDetails about the flash mode Forced flashSuppressed flash Red-Eye ReductionTap the key in the photograph mode Currently set self-timer iconZooming Images to Be Photographed Determine how much the image is to be zoomedChanging the Photography Menu Settings Tap the icon of the menu item to be changedTap the icon of the parameter to be selected Photography menu items Page Playing Back/Deleting Photographed Images Icon to switch images Tap the key in the playback modePlaying Back Images To display one desired image in a regular size SliderTo restore a regular size Tapping restores the original image sizeEnlarging Photographed Images Zoom Playback Tap the key in the playback mode Playing Back Images Continuously SlideshowTo interrupt the slideshow Slideshow iconDrawing Images Paint Select the pen thickness and color by tapping the iconTap the key, then make a drawing by dragging on the screen To correct letters or illustrations To fill in a desired areaSave icon To cancel protection Protection setting iconProtection icon Protection cancel icon Protecting Images ProtectErasing Images Formatting the SD Card Confirmation screen, tap the iconFormat icon Connecting to the PC Connectingtothe About the Supplied SoftwareAbout the Used Terms Connecting to the PC ConnectingConnection Flow Minimum System RequirementsConnecting to a Windows PC With using WindowsInsert the supplied CD-ROM into the CD-ROM drive Click the iconInstalling USB driver Connecting to a Macintosh Connect the USB cable to the PC and this cameraDisconnecting the Camera from the PC With Windows 98 installedWith Windows 2000, ME or XP installed With Macintosh installedIf connecting the camera to the PC does not start ACDSeeTM When using a Windows PCWhen using a Macintosh Copying Images to This Camera Select a post-conversion image size, then click OKImages are copied with the original sizes unchanged File Structure Other Useful Information Tapping this restores the previous screen TapTap the icon of the item to be changed OtherUseful InformationSetup Menu Items Select an image, then select the number of prints UsefulTo confirm the current settings To clear the current settingsTap or to make selection for printing date Message Meaning Troubleshooting Problem Cause RemedyFrequently Asked Questions FAQ QWhy can’t I focus the camera properly?Supplied Accessories Other Useful InformationGlobal Contacts Index