6-2 Installing the Camera Unit
•When installing the camera unit on the wall, mount it with the drain groove on the downside. Do not block the drain groove.
•When installing the camera unit outdoor, make waterproof for the cables. The camera body is
A
Mounting Base center
Mounting Base
Drain groove
Cable access hole ø 27 mm
Mounting Base center
B | 46 | mm |
|
85 | mm |
|
C | 46 | mm | |
| |||
|
|
| |
|
|
| 7 |
| 55 | mm | |
| 83.5 |
| |
| mm | ||
|
| ||
83.5 | mm |
|
55
7 mm
85 |
| A , C Wall or Ceiling | |
mm | B , D Junction Box | ||
|
Cable access hole ø 27 mm
With female screw for piping
| Cable exit |
| |
| (sideway) | D | |
| Rear cable hole | ||
| In case of using the | ||
Screws (not supplied) | Drain groove | variable mounting | |
holes | |||
| |||
x4 |
|
| |
Fix firmly. |
|
|
Align to this mark.
Screws x3
Mount camera base with three supplied screws A. (Longer screw(M4x16)) Tighten and lock the screws firmly.
Top Cover
Camera Base
Mount the top cover (the assembly of the dome cover) and secure it firmly with three security screws by the supplied special hexangular wrench.
Align to this mark.
- 9 -