Toshiba IK-VR01A instruction manual Tilt rotation

Page 9

Tilt rotation

Horizontal rotation

a

a

2

 

 

 

Tilt Lock

 

 

 

 

 

 

 

 

 

 

FAR

 

 

 

 

 

 

1 Pan Lock

4 Focus

 

 

 

a

lock lever NEAR WIDE

TELE

 

 

3 Zoom

Pan

Remove three silver

 

 

 

screws transport protection.

lock lever

 

aTransport Protection Screws (silver)

(2)The lens direction in pan direction can be adjusted by turning pan lock 1 counterclockwise to unfasten it without moving the lens. After adjustment, turn pan lock 1 clockwise to fasten it.

Note :

• Do not turn the lens over 360° . Otherwise the inner connector may be broken and the image may not appear.

(3)The lens tilt angle can be adjusted by loosening the tilt lock 2. After adjusting, tighten the tilt lock 2.

(4)Adjust the zoom position by loosening the zoom lock lever 3. After adjusting, tighten the zoom lock lever 3.

(5)Adjust the focus by loosening the focus lock lever 4. After adjusting, tighten the focus lock lever 4.

(6)Repeat the adjustments from step (1) to step (5) till the optimum image appears.

- 8 -

Image 9
Contents IK-VR01A Attachments Important SafeguardsField Installation Components Features & DescriptionPart Names & Functions Mode Setting Switch Lens Iris ADJBasic connection single system configuration Do not overload power supplyConnections and Operations Line-Lock Control Video Switcher CAMERA1Installations Adjust the Angle of ViewImportant Notice Tilt rotation Installing the Camera Unit 46 mm Change of Dome Cover Dome replacementLine Lock Phase Condition Check Points Case of ProblemsMinimum Illumination SpecificationsExterior View 150 Mounting Base Bracket