Toshiba IK-VR01A instruction manual 46 mm

Page 11

6-2-2 Installation to Junction Box with Bracket (Flush Mount Installation)

46 mm

Bracket

Screws (not supplied) x4

Junction Box

83.5

mm

 

Note the direction of the bracket, which has two sides.

Align the marks.

Screws x3

Mount camera base with three supplied screws B. (Shorter screw(M4x10)) Tighten and lock the screws firmly.

Mount the top cover (the assembly of the top dome cover) and secure it firmly with three security screws by the supplied special hexangular wrench.

Align to this mark.

- 10 -

Image 11
Contents IK-VR01A Attachments Important SafeguardsField Installation Components Features & DescriptionPart Names & Functions Mode Setting Switch Lens Iris ADJConnections and Operations Basic connection single system configurationDo not overload power supply Line-Lock Control Video Switcher CAMERA1Important Notice InstallationsAdjust the Angle of View Tilt rotation Installing the Camera Unit 46 mm Change of Dome Cover Dome replacementLine Lock Phase Condition Check Points Case of ProblemsMinimum Illumination SpecificationsExterior View 150 Mounting Base Bracket