Maintenance
This chapter explains how to restore the Network Camera to factory default, upgrade firmware version, etc.
Reboot
This feature allows you to reboot the Network Camera, which takes about one minute to complete. When completed, the live video page will be displayed in your browser. The following message will be displayed during the reboot process.
If the connection fails after rebooting, manually enter the IP address of the Network Camera in the address field to resume the connection.
Restore
This feature allows you to restore the Network Camera to factory default settings.
Network Type: Select this option to retain the Network Type settings (please refer to Network Type on page 45).
Daylight Saving Time: Select this option to retain the Daylight Saving Time settings (please refer to System on page 36)
If none of the options is selected, all settings will be restored to factory default.
The following message is displayed during the restoring process.
Calibrate
This feature
105