Network: This rule allows the user to assign a network address and corresponding subnet mask to the Allow/Deny List.
For example:
IP address 192.168.2.x will be bolcked.
Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List. This rule is only applied to IPv4.
For example:
■ Delete Allowed/Denied list:
In the Delete Allowed List or Delete Denied List column, make a selection and click Delete.
NOTE
●For example, when the range of IP addresses on the allowed list is set from 1.1.1.0 to 192.255.255.255 and the range in the denied list is set from 1.1.1.0 to 170.255.255.255, only users’ IPs between
171.0.0.0 and 192.255.255.255 can access the Network Camera.
Allowed Denied
ListList
Administrator IP address
Always allow the IP address to access this device: You can check this item and add the Administrator’s IP address in this field to make sure the Administrator can always connect to the device.
65