Camera Control
This section explains how to control the Network Camera’s Pan/Tilt/digitl Zoom operation via the control panel and how to preset positions.
Preset Positions
You can preset positions for the Network Camera to go to directly or patrol. A total of 20 preset positions can be configured.
Please follow the steps below to preset a position:
1.Adjust the shooting area to the desired position using the buttons on the right side of the window.
2.Click Set as home or Default home to define your home position.
3.Enter a name for the preset position, which allows for up to forty characters. Click Add to enable the settings. The preset positions will be displayed under the Preset Location list on the
4.To add additional preset positions, please repeat steps 1~2.
5.To remove a preset position from the list, select it from the
6.The preset positions will also displayed on the main page. Please refer to the illustration on the next page.
7.Click Save to enable the settings.
3
1Functions are the same as the Control Panel on the home page
2
3
5
7
78