Toshiba IK-SX1L instruction manual Symptoms Possible causes, Hd, Vd/Len, Fen

Symptoms

Possible causes

No image

• Is power properly supplied?

• Is the lens iris adjusted properly?

•

Is the CRT monitor adjusted properly?

•

Is the shutter mode set correctly?

Power supply

DC12 ± 10%

Power consumption

Approx. 1.7W

Image sensor

2/3inch Progressive Scanning CCD

(Effective pixels)

(Horizontal: 1392 pixels, Vertical: 1040 pixels)

Scanning system

Noninterlace

Scan frequency

Horizontal: 15.998 kHz, Vertical: 14.98 Hz

Sensitivity

F16 600 lx (GAIN OFF)

Lens mount

C mount

Ambient temperature

32 to 104° F (0 to 40°C)

Ambient humidity

Less than 90%

Weight

Approx. 4.77 oz (135g)

External dimension

1.73" (W) x 1.73" (H) x 2.05" (D)

(44 (W) x 44 (H) x 52 (D) mm) (except for protruded portion)

Gain

ON (-3 to 12 dB), OFF (0 dB)

Video output

IK-SX1L: EIA RS-644 LVDS video 8-bit digital output

IK-SX1: Camera link video 8-bit digital output

Electric shutter

1/15s, 1/100s, 1/500s, 1/1000s, 1/2000s, 1/4000s,

1/10000s, 1/50000s

Mode

Internal synchronization, internal synchronization draft,

internal synchronization partial scanning

1-Pulse trigger, 1-pulse trigger partial scanning

Pulse width trigger, Pulse width trigger partial scanning

Partial scanning

Scanning area 1/15 (70 lines, 6 fps)

Scanning area 1/2.6 (400 lines, 30 fps)

Scanning area 1/2 (560 lines, 24 fps)

Scanning area 2/3 (700 lines, 20 fps)

Sync signal output

HD, VD/LEN, FEN

LVDS format (IK-SX1L)

Camera Link format (IK-SX1)

PCK (28.63636 MHz) LVDS format (IK-SX1L)

Camera Link format (IK-SX1)

External trigger input

TRIGGER; Low level: Less than 0.4V, High level: 3.4 to 5V

Negative

More than 20∝s pulse width

Optional parts

EXC-SX03M (cable for IK-SX1L), EXC-SX03A (cable for IK-

SX1L), EXC-CL05 (cable for IK-SX1), etc.