Toshiba IK-SX1L instruction manual Keep the followings when installing, Humidifier, etc

Page 3

Caution

Keep the followings when installing.

Do not put the product on a Inflammable material such as carpet or blanket.

Do not put the product in a narrow space, since the heat generated from the prod-

uct may be difficult to emanate.

Do not put a inflammable material on the product.

If you do not keep above, the heat generated by the product may cause fire.

Do not put the product in direct sunshine and/or high temperature. The temperature rise inside the product may cause fire.

Do not put the product In a moist or dusty place such as a bathroom, a place close to

a humidifier, etc.

This may cause fire and/or electric shock.

Do not put the product in a moist, soot and/or dusty place.

Do not put the product where a soot and steam may occur, such as a kitchen, etc., or in a dusty place. This may cause fire and/or electric shock.

Do not shoot the sun with the lens and do not put the lens in the place exposed to an intensive light, such as the sunshine, etc.

Focusing of the light may cause injury of eye and/or fire.

Do not put the product in your mouse and do not swallow it. This may cause suffocation and/or injury.

Ask your dealer to perform a periodical check and internal cleaning (approx. once

every five years).

Dust inside the product may cause fire and/or trouble. For check and cleaning cost, please consult your dealer.

Disclaimer

We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user in any of the following cases:

1.Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or accidental; use under extreme operating conditions.

2.Malfunction or non-function resulting in indirect, additional or consequential damages, including but not limited to loss of expected income and suspension of business activities.

3.Incorrect use not in compliance with instructions in this instruction manual.

4.Malfunctions resulting from misconnection to other equipment.

5.Repairs or modifications made by the user or caused to be made by the user and carried out by an unauthorized third party.

6.Notwithstanding the foregoing, Toshiba’s liabilities shall not, in any circumstances, exceed the purchase price of the product.

3

Image 3 Contents
For Customer Use IK-SX1L/IK-SX1Meaning Graphic symbol definitions SymbolDo not use the product when abnormality occurs Indication definitionsKeep the followings when installing Humidifier, etcDo not put the product in a moist, soot and/or dusty place Components Camera Parts and Functions Connections When cleaning the camera Install the camera in a location free from noiseOperating ambient temperature and hu- midity When not using the camera for a long- timeDC in 12V terminal Mode Select switchGain control volume Picture-shooting areaStandard Connection Connector Pin AssignmentsIK-SX1L Gain switch Synchronizing mode selector switchMode setting switch Partial scanning switch Electric shutter speed switchInternal synchronization Internal synchronization draft modeInternal synchronization partial readout 1-pulse trigger partial readout 1-pulse triggerPulse width trigger partial readout Pulse width triggerScanning area 1/15 Lines, 60 fps 6 400 lines, 30 fps All pixel scanning Rate Draft modePartial scanning Internal synchronization Output position HD, VD/LEN, FEN Symptoms Possible causesDimensions mm inch Memo Memo Limited Warranty CCD Camera