4.1. Standard Connection
Lens
Image processor
Camera cable (option)
DC IN 12V
DC power supply
4.2. Cautions on Connection
•When connecting the camera cables, be sure to turn off the camera and the other equipment connected.
•The lens for high resolution is recommended.
When using another lens, the best camera performance of this camera may not be obtained.
(For example, low resolution may occur, and flare, ghost or shading may occur)
•For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA approved ungrounding type AC adaptor with the specifications described below.
Power supply voltage: DC12V±10%
Current rating: More than 830 mA, Less than 2.5A
Ripple voltage: Less than 50
Connector:
Pins 3, 4: GND
4.3. Connector Pin Assignments
DC IN 12V
1+12V
2+12V
3GND
4GND
Hirose Electronics Co. Ltd.
13
24
7