Toshiba IK-SX1L Carefully handle the units, Do not shoot intense light, Moire

•Carefully handle the units.

Do not drop, or give a strong shock or vibration to the camera. This may cause problems. Treat the camera cables care- fully to prevent cable problems, such as cable breakdown and loosened connec- tions.

•Do not shoot intense light.

If there is an intense light at a location on the screen such as a spot light, a blooming and smearing may occur.

When intense light enters, vertical stripes may appear on the screen. This is not a malfunction. Ghosts may occur when there is an intense light near the object. In this case, change the shooting angle.

•Install the camera in a location free from noise.

If the camera or the cables are located near power utility lines or a TV, etc. undesir- able noise may appear on the screen. In such a case, try to change the location of the camera or the cable wiring.

•Moire

When thin stripe patterns are shooted, stripe patterns that are not actually there (moire) may appears as interference stripes. This is not a malfunction.

•Operating ambient temperature and hu- midity.

Do not use the camera in places where temperature and humidity exceed the specifications. Picture quality will lower and internal parts may be damaged.

Be particularly careful when using in places exposed to direct sunlight. When shooting in hot places, depending on the conditions of the object and the camera (for example when the gain is increased), noise in the form of vertical strips or white dots may occur. This is not a mal- function.

•Handling of the protection cap.

Keep the protection cap away from chil- dren. Children may put them into mouth or swallow them accidentally. The pro- tection cap protects the image sensing plane when the lens is removed from the camera, do not throw away.

•When not using the camera for a long- time.

Stop supplying power.

•When cleaning the camera

Always turn off the power and clean with a piece of dry cloth. If necessary, gently wipe with a cloth dampened with thinned detergent. Do not use benzine, alcohol, thinner, etc. If used, coating and printed letters may be discolored. When cleaning the lens, use a lens cleaning paper, etc.