General Connection (without PoE)
1.Connect the camera to an Ethernet switch via LAN cable.
2.Connect the power cable from a power unit (not supplied) to the appropriate port of the general I/O terminal.
(See page 12).
3.Connect the PC to an Ethernet switch via Ethernet cable.
3 | Ethernet switch |
(not supplied) |
1
Client PC
(not supplied)
2
AC 120V
AC24V or DC12V adapter
UL Listed Class 2 power supply (not supplied)
NOTE
•Recommended power cord is twisted pair line with a minimum wire size of 18 AWG.
•The recommended power supply for this camera is 12 watts minimum.
•When PoE is connected, don't supply AC24V or DC12V from the I/O terminal.
•Never input AC24V and DC12V at the same time.
16