Toshiba IK-WD14A quick start Assigning IP Address

Page 17

Assigning IP Address

1.Install the "Installation Wizard" under the Software Utility directory from the CD- ROM.

2.The program will analyze your network environment. After your network is analyzed, please click on the "Next" button to continue the program.

Installation

Wizard

3.The program searches for other Network Cameras on the same network.

4.After searching, the main installer window will pop up. Click on the MAC address of the appropriate device to connect to the Network Camera.

00-02-D1-71-42-70

169.254.0.99

IK-WR12A

0002D1714270

NOTE

•If "Installation Wizard" does not find the camera during the search, try turning off the wireless LAN of a PC.

•Installation Wizard can search the location of the Network Camera even though DHCP is not used on the network. In this scenario, assign the camera a static IP address because the IP address of the Network Camera has been assigned 169.254.*.* by default.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model IK-WD14A FCC USA-INFORMATION IntroductionTerms and Trademarks Table of Contents Important Safeguards Other trouble. Replacement Parts Damage Requiring ServiceSafety Check LightningField Installation Marking Check the ambient temperature and humidity Keep the camera installation away from video noiseDo not aim the camera at the sun Do not shoot intense lightItems needed for network camera monitoring Administrators personal computerContents Physical Description Status LED Bottom Camera Dome Cover Hardware InstallationMounting the camera to a solid surface Cable installationNetwork Deployment When using a PoE-enabled switchWhen using a non-PoE switch General Connection without PoE Assigning IP Address Retrieving Images To adjust the viewing angle Adjusting the LensDome cover To adjust the zoom factor and focus range Adjusting the Zoom and FocusToshiba America Information SYSTEMS, INC
Related manuals
Manual 123 pages 45.01 Kb
Top Page Image Contents