Toshiba IK - HD1C instruction manual Operation, Automatic Black Balance, Display Meaning

Page 11

6 OPERATION

A camera head "IK-HD1H" needs to be connected to this camera control unit from this section on. Refer to the item “5. CONNECTION”, connect the equipment correctly.

Turn on the connected equipment and the camera.

When using the camera for the first time and when replacing the camera cable and the camera head, be sure to perform the ABB adjustment, refer to the item “6.1 Automatic Black Balance”.

Aim the lens at the object, adjust the lens iris adjustment, focus adjustment, etc.

Refer to the item “6.2 White Balance”, make the adjustment.

Refer to the items “6.3 Scene File, 6.4 Gain, 7. MODE SETTING BY THE ON SCREEN DISPLAY”, select the necessary items.

6 1 Automatic Black Balance

Black balance adjustment is necessary to get the correct black picture level.

䊶Close the lens iris.

䊶If the color bar pattern is displayed on the screen or if the index menu/menu is displayed, press the [DISP] button to disable the color bar pattern or the character display.

䊶Hold the [DATA DOWN] button for approx. 1 second.

䊶When the black balance adjustment operation starts, the character ABB blinks on the screen.

䊶When the black balance adjustment operation finishes, the character ABB stops blinking and the result appears for approx. 1 second.

Display	Meaning
ABB OK	Automatic black balance adjustment finished correctly.
ABB NG	Automatic black balance adjustment cannot be performed because the lens iris
CLOSE LENS	is open. Close the lens iris.
ABB NG	Automatic black balance adjustment cannot be performed.
	Operate the automatic black balance again.

11

Image 11

Contents IK-HD1C Safety Precautions Disclaimer Limitation of Usage Table of ContentsOption Components Items Controlled by the on Screen Display Available selections Preset value Factory settingFront Names and FunctionsStandard Connection ConnectionConnection on Back Panel Back panel view 3A Connector Pin AssignmentsDisplay Meaning OperationAutomatic Black Balance White Balance FeaturesAWB OK Gain Scene FileAutomatic shading correction operation finished correctly Shading CorrectionUsing the Menus Mode Setting by the on Screen DisplayFlicker may be large MenusSHUTTER䋨Electronic shutter䋩 Changing the automatic shutter response speed 䋨1䋮1䋩 Changing the setting in Auto modeChanging the video level in the automatic shutter mode Changing the automatic shutter zone area Changing the shutter speed 䋨1䋮2䋩 Changing the setting in Manual mode䋨1䋮3䋩 Changing the setting in SS Synchro. Scan mode Changing the shutter speed settingModemanual Mode Auto MAX Gain䋨2䋮2䋩 Changing gain in Manual mode Gain Video gainChanging R Paint Changing color temperature settingConfirming the contents of the zone area selected by AWB 䋨3䋩 WHT BALWhite BalanceMode ATW Paint Changing the blue gain 䋨3䋮3䋩 Changing gain in Manual modeMode Manual Gain Temp Changing the red gain䋨4䋮2䋩 Changing gamma correction level 䋨4䋩 Process䋨4䋮1䋩 Changing gamma correction ON/OFF 䋨4䋮5䋩 Changing DNR Digital Noise Reduction 䋨4䋮3䋩 Changing detail outline gain䋨4䋮4䋩 Changing master pedestal 䋨5䋮1䋩 Changing Matrix color correction ON/OFF 䋨5䋮2䋩 Changing Matrix setting䋨5䋩 MATRIXMatrix color correction 䋨6䋮1䋩 INT screen 䋨6䋮2䋩 Changing EXT. settingAdjusting horizontal phase 䋨6䋩 Sync䋨7䋩 Option 䋨7䋮1䋩 Changing Output mode䋨7䋮2䋩 Changing shading correction mode 䋨7䋮3䋩 Changing manual shading correction modeRGB Sync 䋨8䋩 Returning to factory settings䋨7䋮6䋩 Changing OSD Output mode Output RGBExternal Sync 䋨1䋩 External sync signal input conditionsUsing the unit with external sync signal Setting by 1HSymptom Items to be checked Before Making Service CallCCD SpecificationsExternal Appearance Diagram Your Responsibilities One 1 Year Limited Warranty of Labor and PartsHow to Obtain Warranty Service Step-By-Step Procedures