Toshiba IK - HD1C instruction manual 䋨3䋮3䋩 Changing gain in Manual mode, Mode Manual Gain Temp

Page 24

䋨3䋮3䋩 Changing gain in MANUAL mode

Move up and down

 

Select the desired

by pushing

 

value by pushing

MENU UP,DOWN

 

DATA UP,DOWN

--3 WHT BAL -- <FILE A>

MODE

MANUAL

R GAIN

0

B GAIN

0

C TEMP

3200k

White balance mode

AWB, ATW, MANUAL

Red gain adjustment

-100 to 100

Blue gain adjustment

-100 to 100

Color temperature setting 3200K, 5600K

(1) Changing the red gain

Move the “ ” to R GAIN by pushing [MENU UP], [MENU DOWN] buttons.

Select the desired value of red gain by pushing [DATA UP], [DATA DOWN] buttons.

䌛DATA UP䌝 Red is increased.

10 0 10

Red is decreased. 䌛DATA DOWN䌝

(2) Changing the blue gain

Move the “ ” to B GAIN by pushing [MENU UP], [MENU DOWN] buttons.

Select the desired value of blue gain by pushing [DATA UP], [DATA DOWN] buttons.

䌛DATA UP䌝 Blue is increased.

10 0 10

Blue is decreased.䌛DATA DOWN䌝

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents IK-HD1C Safety Precautions Disclaimer Table of Contents Limitation of UsageOption Components Available selections Preset value Factory setting Items Controlled by the on Screen DisplayNames and Functions FrontConnection Standard Connection3A Connector Pin Assignments Connection on Back Panel Back panel viewOperation Automatic Black BalanceDisplay Meaning Features White BalanceAWB OK Scene File GainShading Correction Automatic shading correction operation finished correctlyMode Setting by the on Screen Display Using the MenusMenus SHUTTER䋨Electronic shutter䋩Flicker may be large 䋨1䋮1䋩 Changing the setting in Auto mode Changing the video level in the automatic shutter modeChanging the automatic shutter response speed Changing the automatic shutter zone area 䋨1䋮2䋩 Changing the setting in Manual mode 䋨1䋮3䋩 Changing the setting in SS Synchro. Scan modeChanging the shutter speed setting Changing the shutter speedMode Auto MAX Gain 䋨2䋮2䋩 Changing gain in Manual modeGain Video gain ModemanualChanging color temperature setting Confirming the contents of the zone area selected by AWB䋨3䋩 WHT BALWhite Balance Changing R PaintMode ATW Paint 䋨3䋮3䋩 Changing gain in Manual mode Mode Manual Gain TempChanging the red gain Changing the blue gain䋨4䋩 Process 䋨4䋮1䋩 Changing gamma correction ON/OFF䋨4䋮2䋩 Changing gamma correction level 䋨4䋮3䋩 Changing detail outline gain 䋨4䋮4䋩 Changing master pedestal䋨4䋮5䋩 Changing DNR Digital Noise Reduction 䋨5䋮2䋩 Changing Matrix setting 䋨5䋩 MATRIXMatrix color correction䋨5䋮1䋩 Changing Matrix color correction ON/OFF 䋨6䋮2䋩 Changing EXT. setting Adjusting horizontal phase䋨6䋩 Sync 䋨6䋮1䋩 INT screen䋨7䋮1䋩 Changing Output mode 䋨7䋮2䋩 Changing shading correction mode䋨7䋮3䋩 Changing manual shading correction mode 䋨7䋩 Option䋨8䋩 Returning to factory settings 䋨7䋮6䋩 Changing OSD Output modeOutput RGB RGB Sync䋨1䋩 External sync signal input conditions Using the unit with external sync signalSetting by 1H External SyncBefore Making Service Call Symptom Items to be checkedSpecifications CCDExternal Appearance Diagram One 1 Year Limited Warranty of Labor and Parts How to Obtain Warranty Service Step-By-Step ProceduresYour Responsibilities
Top Page Image Contents