䋨3䋩 WHT BAL(White Balance)
The WHT BAL has three modes; AWB, ATW, MANUAL.
Move the “ ” to MODE, push the [DATA UP], [DATA DOWN], and select one of the three modes : AWB, ATW, MANUAL.
䋨3䋮1䋩 Changing the setting in AWB(Automatic White Balance) mode
Move up and down |
| Select the desired |
by pushing |
| value by pushing |
MENU UP,DOWN |
| DATA UP,DOWN |
--3 WHT BAL
MODE | AWB |
C TEMP | 3200K |
R PAINT | 0 |
B PAINT | 0 |
AREA | PRESET A |
White balance mode setting AWB, ATW, MANUAL
Color temperature setting 3200K, 5600K
R PAINT adjustment | |
B PAINT adjustment |
AWB area
PRESET A, PRESET B, PRESET C, PRESET D, PRESET E
(a) Changing color temperature setting
Move the “ ” to C.TEMP by pushing [MENU UP], [MENU DOWN] buttons. Select either 3200K or 5600K by pushing [DATA UP], [DATA DOWN] buttons.
(b) Changing R PAINT
Move the “ ” to R PAINT by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of red paint by pushing [DATA UP], [DATA DOWN] buttons.
| 䌛DATA UP䌝 | Red is increased. |
10 | 0 | 10 |
Red is decreased. | 䌛DATA DOWN䌝 |
|
(c) Changing B PAINT
Move the “ ” to B PAINT by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of blue paint by pushing [DATA UP], [DATA DOWN] buttons.
| 䌛DATA UP䌝 | Blue is increased. |
10 | 0 | 10 |
Blue is decreased. | 䌛DATA DOWN䌝 |
|
(d) Confirming the contents of the zone area selected by AWB
Move the “ ” to AREA DISP by pushing [MENU UP], [MENU DOWN] buttons. Select the desired area by pushing [DATA UP], [DATA DOWN] buttons.
22