Toshiba CSGS20CC2, CSGX36CC3, CSGV90CC3 General Handing, Do not place anything on the equipment

Page 3

[General Handing]

WARNING

! Stop operation immediately when any abnormality or defect occurs.

If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign matter, or if the equipment is dropped or malfunctions, fire or electric shock may result.

Be always sure to disconnect the power cable from the wall socket at once and contact your

Unplug dealer.

!Do not use the equipment in locations subject to water splashes. Otherwise, fire or electric shock may result.

Do not get wet

!Do not disassemble, repair, or modify the equipment. Otherwise, fire or electric shock may result.

For internal repair, inspection, or cleaning, contact your sales representative.

Never pull apart

!Do not place anything on the equipment.

If metallic objects, liquid, or other foreign matter enters the equipment, fire or electric shock may result.

Avoid

!Do not install the equipment in an unstable or inclined location or locations subject to vibration or impact.

Otherwise, the equipment may topple over and cause personal injury.

Avoid

!During an electrical storm, do not touch the power cable and the connection cable. Otherwise, an electric shock may result.

Do not touch

!Use the specified voltage.

Use of an unspecified voltage may result in fire or electric shock.

Instruction

!Do not be handled roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled,

placed under heavy objects or heated the power cable and the connection cable. Otherwise, fire or electric shock may result.

Avoid

D4153660A

Image 3
Contents CSGV90CC3 CSGX36CC3 CSGS20CC2 CSGU15CC18 Safety Precautions Definition of Safety Signs DescriptionExplanation of Safety Symbols Description General Handing Do not place anything on the equipmentUse the specified voltage Avoid giving a strong shock against the camera body When performing connection, turn off powerCases for Indemnity Limited Warranty Check a combination with the lens MaintenanceHandle carefully Environmental operating conditionsFollowing information is only for EU-member states Others Overview FeaturesOptional part ConfigurationLED2 Explanation rear panelConnection CSGV90CC3 CSGX36CC3 CSGS20CC2 CSGU15CC18 Functions34fps 46fps Minimum unit size 160 x Expose GbE bus Timing chartTrigin Troubleshooting Electrical specification SpecificationsInternal sync signal specification [Trigger signal specification]Output signal specification Interface specification [Electronic shutter specification][Operating Ambient conditions] [Machine externals specification][Typical spectral response] CSGU15CC18 Outline Drawing D4153660A D4153660A Distributor CSGV90CC3 CSGX36CC3 CSGS20CC2 CSGU15CC18 Cases for Indemnity Limited Warranty Restriction for USE Regarding a lens mount Maintenance Overview Camera body Gamma correction Setup-level settingGain setting White balanceElectronic shutter mode switching Scalable mode Number of total pixels 692 x Trigger signal specification Electronic shutter specification Operating ambient conditions Machine externals specificationTrigin Typical spectral response 12/16 27.8 25.2 Repair Guarantee16/16 Distributor