Toshiba CSGX36CC3, CSGV90CC3 Internal sync signal specification, Trigger signal specification

(9) Masking correction	ON fixed
	* When Raw output mode(8/10bit),
	Masking correction function is disabled (OFF fixed).
(10) White balance	OPWB/MWB switching (initial factory setting: MWB)
-OPWB (One Push White Balance)
・Effective range	2500 K to 6500 K
・Effective area	Full screen
	* When the random shutter is active, OPWB function is disabled.
	* When Raw output mode (8/10bit), OPWB function is disabled.
-MWB (Manual White Balance)
・Setting range	2500 K to 6500 K
・Setting method	R-gain and B-gain can be set independently.
	* When Raw output mode (8/10bit), MWB setting is disabled.
(11) Setup-level	6.3 to 25 % (192step)
	initial factory setting: 6.3% [Approximately 16digit/8bit]
(12) Power supply	DC 12V +/-10% (ripple 100 mV(p-p) or less)
(13) Power consumption	3W (Maximum)
[Internal sync signal specification]
(1) Base clock frequency	36.0000 MHz +/- 100ppm
[Trigger signal specification]
(1) External trigger input
・Input level	Low level: 0 to 0.5V
	High level: 2.0 to 5.0V
・Polarity	Positive/Negative bipolar (initial factory setting: Negative)
・Pulse width	2µs (minimum)
・Input impedance	High impedance
(2) Software trigger	Set via the Gigabit Ethernet interface
[Output signal specification]
(1) BUSY_OUT	The period that input of the trigger signal is forbidden.
- Output level	LVTTL
- Polarity	Positive
(2) EXPOSE_OUT	The period that this camera exposes.
- Output level	LVTTL
- Polarity	Positive
	(7/16)	D4153497A