(5) | Conformity cable | Twist pair (Category 5e or over) | ||
(6) | Cable length | To 100m (at the Unshielded Twist Pair (UTP) cable using) | ||
(7) | Recommended cable | Oki Electric Cable Co., Ltd | ||
|
| HONDA TSUSHIN KOGYO CO., LTD | ||
|
| High bending resistance shielded Cat5e LAN cable | ||
|
| * Because above recommendation cable is high bending | ||
|
| resistance, maximum length of cable is 40m. | ||
|
| * Contact your dealer / distributor for details | ||
|
| of recommended cable. | ||
[Machine externals specification] |
|
|
| |
(1) | Dimensions | 44mm(W) x 29mm(H) x 70mm(D) (Not including protrusion) | ||
(2) | Mass | Approximately 120g | ||
(3) | Lens mount |
| ||
(4) Flange back | it is not possible to adjust it: 17.526mm | |||
(5) | Camera body grounding: insulation status |
|
| |
|
| Conductive between circuit GND and camera body. | ||
[Operating ambient conditions] |
|
|
| |
(1) Ambient conditions |
|
|
| |
- Performance assurance | Temperature: | 0 to +40° C, | Humidity: 10 to 90% (no condensation) | |
- Operating assurance | Temperature: | Humidity: 90% or less (no condensation) | ||
- Storage assurance | Temperature: | Humidity: 90% or less (no condensation) | ||
(2)EMC conditions
-EMI
FCC part15 Subpart B class A conformity
-
Notes on Conformity of the EMC:
About the conformity of the EMC standard of this machine, it has guaranteed in the conditions combined with the option part of 4th clause.
When used combining parts other than specification of our company, I ask you to have final EMC conformity checked of a visitor with a machine and the whole equipment.
(9/16) | D4153497A |
|