How to use OSD Menu
How to use OSD Menu
❖ DAY/NIGHT | [DAY,NIGHT,AUTO] |
•DAY
If set to DAY, it will be fixed to DAY mode regardless of the ambient conditions.
•NIGHT
| AUTO |
BURST | OFF |
DAYÆNIGHT |
|
BRIGHTNESS | MID |
DWELL TIME | 2SEC |
NIGHTÆDAY |
|
BRIGHTNESS | MID |
DWELL TIME | 5SEC |
MASK AREA | 1 2 |
If you press the SETUP switch in item 1 or 2 of the MASK menu, you will see a menu where you can specify an area to mask.
MASK AREA <SIZE> <LOCATION>
WHITE BAL
DAY/NIGHT |
|
| DAY |
|
|
MODE |
|
| AWC | ||
RED | |||||
BLUE | |||||
[0128] |
|
|
|
| |
[0128] |
|
|
|
| |
|
|
|
|
|
|
If set to NIGHT, it will be fixed to
If you press the SETUP switch with a NIGHT sub menu selected, you will see a menu where you can set Burst to OFF/ON.
If BURST is set to ON, the Burst signal will output together with the
You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.
•AUTO
The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition.
If you press the SETUP switch with an
26 – High Resolution Compact ATM Camera
You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode. Brightness of DAYÆNIGHT sets the criterion for switching color (C) to black&white (BW), selectable from LOW, MEDIUM and HIGH. The lower the setting (HIGH Æ LOW) is, the darker condition the switching will be.
The DWELL TIME of DAYÆNIGHT is the criterion of switching requirement.
Brightness of NIGHT Æ DAY sets the criterion for switching black&white (BW) to color (C), selectable from LOW, MEDIUM and HIGH. The lower the setting (HIGH Æ LOW) is, the darker condition the switching will be.
The DWELL TIME of NIGHT Æ DAY is the criterion of switching requirement.
The MASK AREA menu is provided for preventing switching failure or error which may be caused by bright spot lighting source at night.
The MASK menu is used to prevent a filter switch error or inability of determining the switch in existence of a high spot light source at night.
You can specify Mask 1 and 2 simultaneously.
The mask is used only for determining the switch and any excessive bright area at night will be masked.
Note :
–If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated.
❖ WHITE BAL | [DAY/NIGHT] |
If you want to adjust the color scheme, use the WHITE BALANCE function.
•DAY
In DAY mode, you can set the color values of RED and BLUE. The screen will be displayed in colors according to your settings.
Note :
– You can set the values of
•NIGHT
Use the NIGHT mode if you want to set the white balance differently according to the ambient luminance.
If the NIGHT mode is set to OFF, the white balance will always operate as set in DAY mode; if not
to OFF, the camera will switch to as set in DAY/ NIGHT mode according to the brightness.
In NIGHT mode, you can set the values of RED, BLUE and BRIGHTNESS. The screen will be displayed in colors according to your settings.
WHITE BAL
DAY/NIGHT |
|
| NIGHT |
|
| |
BRIGHTNESS |
|
|
| MID | ||
MODE |
|
|
| AWC | ||
RED | ||||||
BLUE | ||||||
[0128] |
|
|
|
|
| |
[0128] |
|
|
|
|
| |
|
|
| ||||
27