Installation
How to use OSD Menu
CONNECTING TO MONITOR
Connect the Video Output jack to the
POWER
VIDEO
USING ICONS IN THE MENU
• (EXIT)
Exits the menu setting.
Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel.
• (RET)
Returns to the previous menu.
MAIN MENU
MAIN MENU
PROFILE
CAMERA SET
INTELLIGENCE
PRIVACY ZONE
OTHER SET
SYSTEM INFO
CCTVCamera | Monitor |
CONNECTING TO POWER
Connect the adaptor to the power input terminal as shown in the figure below.
The recommended adaptor specification for
POWER
VIDEO
• (SAVE)
Used to save your settings of MASK AREA, PRIVACY ZONE and more.
Once you save your settings, they will remain even if you select QUIT in the menu.
• (DEL)
Used to deletes your settings of MASK AREA, PRIVACY ZONE and more.
Once you delete your settings, they will not be restored even if you select QUIT in the menu.
•PROFILE
You can set a mode according to the camera installation conditions.
•CAMERA SET
Configure Camera related functions and data.
•INTELLIGENCE
You can configure the settings of motion detection, tracking and more.
•PRIVACY ZONE
You can configure the privacy related settings.
•OTHER SET
You can configure for Factory Defaults, and more.
•SYSTEM INFO.
Shows the Camera Version and System Information.
16 – High Resolution Compact ATM Camera | 17 |