How to use OSD Menu
How to use OSD Menu
Note : | ❖ DIGITAL ZOOM | [ON/OFF] |
❖ DETAIL | [0~3] |
Note : |
– You can set the values of |
mode. |
– If AGC is set to OFF or FIX, you can not access the NIGHT |
menu. |
You can set the digital zoom factor and position. If you press the SETUP switch with the DIGITAL ZOOM function set to ON, you will see the appropriate screen.
When the zoom factor and position are defined, the
Controls the horizontal or vertical distinction.
❖ | [INT, LINE] |
Select the vertical sync mode for INT or LINE.
– If more than one privacy zone is set and the PRIVACY SET is |
set to ON, the PIP function will be deactivated. |
– If the INTELLIGENCE function is set to FENCE mode, the PIP |
menu will be deactivated. |
– For adjusting the white balance, the following 5 |
modes are provided: |
• ATW1(Auto Tracing White Balance mode 1): |
The camera can automatically adjust the color |
temperature in real time, according to the ambient |
conditions. The color temperature ranges from |
approx. 2500K to 9300K. |
• ATW2: The color temperature ranges from |
approx. 2,000K to 10,000K. |
• AWC ( Auto White Balance Control): If you |
press the SETUP switch in the appropriate item |
position, Auto White Balance will perform once. |
digital zoom function will operate.
DIGITAL ZOOM
RATIO [X1.0]
<LOCATION>
If you select INT, the camera will use the internal synchronization.
If selecting LINE, the camera will use the external power source frequency for the synchronization.
You can adjust the
❖ AGC COLOR SUP | [LOW , MID, HIGH] |
Adjust the color scheme according to the AGC value.
❖ DIS | [OFF, ON] |
Digital Image Stabilization will set the
Note :
–If you set DIS to ON, the compensation area will be enlarged as set in the digital zoom factor.
If you set the digital zoom factor to greater than the enlarged zoom factor for the compensation, the DIS function will be deactivated.
• 3200K : Set color temperature to 3200K |
• 5600K : Set color temperature to 5600K |
– RED : Adjusts the strength of the red color. |
– BLUE : Adjusts the strength of the blue color. |
– |
color temperature manually. |
– BRIGHTNESS : Select a brightness level in |
switching from setting in DAY mode to setting in |
NIGHT mode. |
-LOCATION : If you press the SETUP switch in the condition where the image is enlarged as much as
the ratio setting, you can watch an invisible area of the effective screen as well using the cdef switch.
Note :
–If the digital zoom factor is set to larger than 1x, the FENCE function will be deactivated.
–The DIGITAL ZOOM function enlarges the pixel itself, which can cause deterioration of the quality.
❖ REVERSE | [OFF, H, V, H/V] |
Mirrors video signals horizontally, vertically, or both.
❖ POSI/NEGA | [+, |
Output as it is or mirror the video brightness signal.
❖ PIP | [OFF, ON] |
Displays a sub image together with the main image on the same screen using the Picture In Picture function.
28 – High Resolution Compact ATM Camera
29