Fn button: Drive mode |
Fn button: ISO
You can select continuous shot, and |
|
AEB (Auto Exposure Bracketing). |
|
| Single |
Icon Drive Mode | Description |
You can select the ISO sensitivity when taking pictures.
The speed or specific
Auto |
Single | Take one picture only. | |
|
| |
Continuous | Images will be taken continuously until the Shutter | |
button is released. | ||
|
| Take three pictures in a series in different | |
AEB | exposures: standard exposure (0.0EV), short | |
| exposure | |
|
| |
| This takes 6 shots per second for up to 5 seconds, | |
Motion | when the Shutter is pressed and held down. After | |
completing the continuous shooting, images are | ||
Capture | ||
saved automatically. The maximum number of | ||
| ||
| shots is 30 and the image size is fixed as VGA. |
High resolution and picture quality increases file saving time, which increases
If the [Continuous], [Motion Capture] or [AEB] sub menu is selected, the flash will be off automatically.
If less than 30 pictures are available in the memory, the motion capture is not available.
It is best to use a tripod for the AEB shooting as the time to save each image file is longer and blurring caused by camera shake may occur.
In [Manual] mode, [AEB] does not operate.
When [Smile Shot] or [Blink Detection] is set, [Continuous], [Motion Capture] and [AEB] functions are not available.
Icon | ISO Mode | Description |
|
| The camera’s sensitivity is automatically changed |
| Auto | by variables such as lighting value or subject |
|
| brightness. |
|
|
|
|
| You use a faster (shorter) shutter speed while the |
| ISO 80 | same amount of light is present, by increasing the ISO |
| ISO 100 | sensitivity amount of light is present, by increasing the |
| ISO 200 | ISO sensitivity. However, the image may be saturated |
| in high luminance. The higher the ISO value, the higher | |
| ISO 400 | |
| the camera’s sensitivity to light and therefore the | |
| ISO 800 | |
| greater its capacity to take pictures in dark conditions. | |
| ISO 1600 | |
| However, the noise level in the image will increase as | |
| ISO 3200 | the ISO value increases, making the image appear |
|
| coarse. |
When the ISO 3200 menu is selected, the image size is fixed to under 3M. When [Motion Capture] is set, ISO speed will be set to Auto.