Self-timer (
) / Right button
Motion Timer
In the following cases, the Motion Timer may not operate.
Motion | Icon & | |
|
| |
Pressing the Shutter button after | Blink (1 second interval) | |
setting the Motion Timer |
| |
|
| |
Detecting the subject’s | Blink (0.25 second interval) | |
movement | ||
| ||
|
| |
No movement is detected | Turn on and the image is taken after | |
2 seconds. | ||
|
The Motion Timer flows are as follows. (Movie Clip mode excluded)
Selecting the Motion Timer Pressing the Shutter button Confirming the composition (Within 6 sec.)*1 Starting the detection (Swing your hands fully)*2 Stopping the detection (Do not move) Taking an image (after 2 sec.)
*1: The camera detects the subject’s movement 6 seconds after pressing the Shutter button, so confirm the composition within 6 seconds.
*2: Move your body or hands fully.
The focus distance is over 3m.
The exposure is too bright or
dark In backlight conditions.
The movement is insignificant
The movement is detected beyond the center part (50%)
of the sensor where the movement is recognized.
If the camera doesn`t sense detect any movement for 25 seconds, or the camera doesn’t dectect stillness after sensing movement.
00005
<The detection range of
Motion Timer>