Programme overview, Full EPG | Kathrein UFD 505 specification

Programme overview

EPG

Full EPG

With the button, you receive an overview of the programmes (see on-screen display) currently received from the transponder with time and duration, provided that they are broadcast with electronic programme guide (EPG), for example, with ARD and ZDF. In the right-hand column, the programme title is given in abbreviated form, and the complete title appears in the last two

lines. In the left-hand column, the keys can be used to move the cursor to a programme which should be switched to with

the button. Use to exit the on-screen display again.

The time scale can be altered with the buttons, so the other course of programmes can be called up.

Use the Info button to receiver further information about the currently running programme with up to 254 symbols.

With the and buttons, you receive the programme overview of the currently received transmitter with time and duration (see on-screen display), provided that they broadcast the electronic programme guide (EPG).

The length of the programme list depends on each programme provider and can amount to several days.

It lasts a few seconds for the list to download.

EPG timer programming

Afterwards, you can move the coloured bar in the list with the

buttons and select a programme for timer programming.

The timer is selected with the button and confirmed with . The programme is recorded at the set time.

Press the three times to leave this position without a timer setting.

22

Image 22

Kathrein UFD 505 manual Programme overview, Full EPG, EPG timer programming

Contents

Order no Page Safety Instructions Important Notes First time operation Oscillator frequency L.O Changing the oscillator frequency Remote frequency Important notes regarding operation Operating elements, displays and connections View of rear panel View of front panelFlap folded down Remote control handset keys Second receiver on the command set Connection and putting into operation Button functions Menu conceptAlphanumeric entries Operating instructions Language selection- OSD To connect receiver Preconditions for receiving digital signalsPresetting of receiving system Sat-IF connection TV and video recorder connection Inserting batteries in the remote controlLNB-supply voltage Audio connection Factory setting of receiver First steps Programme selection Important on-screen displays Radio programme list Selecting a TV programmeReception status Selecting a TV programme by number entry Switching over to radio programmeOn-screen displays On Screen Display Reception status radio Selecting a radio programme by number entry Timer-settings VPS signal Programme overview EPG timer programmingFull EPG Stereo and two-channel sound reproduction Sound settingsSetting the volume Mute Selecting programmes last received Programme listsFavourite programmes To sort the channels To delete a programme To add a programme manually Incorrect parameter To enter a name Setting up a satelliteSatellites add/remove To remove satellite Entering a password PasswordFactory setting Parental lock Same accounts for transponder exchange Backup operation Operation from the front panel Setting system parameters System parameters Picture format Summer timeTV type Screen OSD colour OSD trans LNB configuration Installation menu10,7…11,7 GHz Low-band Low-band / analogue transmis Sion Changing the oscillator frequency Antenna settings Satellite search TP set-up/search Transponder selection Error DiSEqC UFO Set-up KHz signal High/Low Pos. A/B Tone Burst Tone burst Opt. A/B Factory setting Recording Playback „Display info Transferring programme lists PreparationTransferring operating software Technical features Technical data Technical annex Accessories Scart socket assignments Connection examples Connection arrangement VHF/UHF VCR LNB Eb/No ratio Short technical lexiconDiSEqC components Programme package Video bit rate Symbol rateTransponder Viterbirate Satellite ServiceDiSEqC menu 998.6246/1001/ZWT/ Subject to technical changes