Kathrein UFD 505 manual View of front panel, View of rear panel, Flap folded down

Operating elements, displays and connections

This section contains a brief description of all the control elements, displays and connections. The key symbols presented here are also used when describing op- erating sequences.

View of front panel

(Flap folded down)

DIGITAL	SATELLITE RECEIVER							g
		MENU		SELECT				Digital Video Broadcastin
1		2	3	4 5	6	7	8	9

View of rear panel
	TV	IF INPUT DIGITAL	Elektroschock-Gefahr!	AC 88V-264V~
		920-2150MHz	Nicht öffnen
AUDIO	VIDEO	14/18V max. 400mA		50/60 Hz
				max.30W
		22kHz
L		DiSEqC 1.1
	VCR	DATA I/O		UFD 505	260494
		IF OUTPUT
	AUX
R
	DIGITAL

1 2 3 4 5 6 7 8 9

Front panel controls and displays

1On/Off switch (with mains separation)

2Menu button to call up or exit from menus or submenus

3Indicator to confirm remote control signal

4Select-button

to confirm a selection

5Power indicator

6Standby indicator

7Cursor keys to step through menus and programmes, and for adjustment of the vol- ume (corresponds to the remote control)

8LED display (4-charachter 7-segment dis- play) for display of programme position and time

9Pressure catch for front flap

Open by lightly applying pressure on the upper right-hand side

Rear panel controls and displays

1Audio output

2 Cinch sockets, left and right channel

2Dolby Digital-output (AC3)

3Video output (FBAS)

4Scart socket TV connection

5Scart socket VCR/AUX connection

6DATA socket

Interface for serial data transmission (Ser- vice)

7Satellite IF signal input

Output of the LNB supply voltage and con- trol signals (22-kHz and DiSEqC 1.1)

8Satellite IF signal output

Output for a analogue secondary receiver. The Sat IF signal is looped through.

9Mains voltage supply line

9