Technical features | Kathrein UFD 505 manual

Installation menu

Technical features

The receiver UFD 505 is equipped with the following features:

Reception of all digital TV channels (free-to-air receiver)

Reception of all DVB radio channels (free-to-air receiver)

Loop-through Sat IF input

Teletext processing for TV set

1800 channel memory positions

Satellite reception frequency range from 950 MHz to 2150 MHz

Freely selectable oscillator frequencies, therefore suitable for all feed systems

Timer programmable for 7 events (once/daily/weekly

Mains switch with mains separation

Automatic settings for date and time via DVB data stream

On-screen display in 9 languages (German, English, French, Greek, Italian, Dutch, Spanish, Turkish, Portuguese)

4-digit LED display

22 kHz programmable control signal

DiSEqC 1.1 and tone burst control signal

Operation with UFOmini and UFOmicro

LNB supply voltage, disconnectible

Connection socket for data copying function RS232

Programme assortment function

Picture format recognition 4:3 and 16:9 with selectable output format

Mute feature

Volume control

Radio keys

Infrared remote control

2 SCART sockets (TV and VCR/AUX connection)

Additional audio outputs via Cinch sockets

Dolby Digital output (AC3)

RF level display

EPG (Electronic programme guide)

Additional information about current programme (Full EPG)

Software download via satellite

45

Image 45

Kathrein UFD 505 manual Technical features

Contents

Order no Page Important Notes Safety Instructions First time operation Oscillator frequency L.O Changing the oscillator frequency Remote frequency Important notes regarding operation Operating elements, displays and connections View of front panel View of rear panelFlap folded down Remote control handset keys Connection and putting into operation Second receiver on the command set Menu concept Button functionsAlphanumeric entries Language selection- OSD Operating instructions Presetting of receiving system Preconditions for receiving digital signalsTo connect receiver Sat-IF connection LNB-supply voltage Inserting batteries in the remote controlTV and video recorder connection Audio connection First steps Factory setting of receiver Important on-screen displays Programme selection Selecting a TV programme Radio programme listReception status On-screen displays On Screen Display Switching over to radio programmeSelecting a TV programme by number entry Reception status radio Selecting a radio programme by number entry VPS signal Timer-settings EPG timer programming Programme overviewFull EPG Setting the volume Sound settingsStereo and two-channel sound reproduction Mute Programme lists Selecting programmes last receivedFavourite programmes To delete a programme To sort the channels To add a programme manually Incorrect parameter Satellites add/remove Setting up a satelliteTo enter a name To remove satellite Factory setting PasswordEntering a password Parental lock Same accounts for transponder exchange Operation from the front panel Backup operation System parameters Setting system parameters TV type Summer timePicture format Screen OSD trans OSD colour Installation menu LNB configuration10,7…11,7 GHz Low-band Low-band / analogue transmis Sion Changing the oscillator frequency Satellite search Antenna settings Transponder selection TP set-up/search DiSEqC UFO Set-up Error KHz signal High/Low Pos. A/B Tone Burst Tone burst Opt. A/B Factory setting Playback Recording „Display info Preparation Transferring programme listsTransferring operating software Technical features Technical annex Technical data Scart socket assignments Accessories Connection arrangement Connection examples VHF/UHF VCR LNB DiSEqC components Short technical lexiconEb/No ratio Programme package Transponder Symbol rateVideo bit rate Viterbirate Service SatelliteDiSEqC menu 998.6246/1001/ZWT/ Subject to technical changes