Selecting a radio programme by number entry | Kathrein UFD 505

On-screen displays On Screen Display

programme and by pressing the buttons you jump to the neighbouring page or enter-in the channel number with the buttons on the remote control. Confirm your

programme selection by pressing the button, press the button to exit the programme list and remain in the programme already set.

Selecting a radio programme by number entry

	You can select a different radio programme during a current radio programme by
	entering the programme location number. Use the number buttons to for
	the purpose of entering the programme location number.
Example	You wish to select the radio programme "DLR-Berlin". This programme is stored
	under the programme location number 015. (The order of radio programmes is de-
	fined in the programme memory and therefore only serves as an example here.)
	To select this programme, press the numbers and one after the other. The
	receiver waits for about 3 seconds for entry of the next number.
	Follow the same procedure for all other programmes – i.e. also programmes with
	three-digit programme location numbers. You do not have to enter leading zeros.

20

Image 20

Kathrein UFD 505 manual Selecting a radio programme by number entry

Contents

Order no Page Safety Instructions Important Notes First time operation Oscillator frequency L.O Changing the oscillator frequency Remote frequency Important notes regarding operation Operating elements, displays and connections Flap folded down View of front panelView of rear panel Remote control handset keys Second receiver on the command set Connection and putting into operation Alphanumeric entries Menu conceptButton functions Operating instructions Language selection- OSD Preconditions for receiving digital signals Presetting of receiving systemTo connect receiver Sat-IF connection Inserting batteries in the remote control LNB-supply voltageTV and video recorder connection Audio connection Factory setting of receiver First steps Programme selection Important on-screen displays Reception status Selecting a TV programmeRadio programme list Switching over to radio programme On-screen displays On Screen DisplaySelecting a TV programme by number entry Reception status radio Selecting a radio programme by number entry Timer-settings VPS signal Full EPG EPG timer programmingProgramme overview Sound settings Setting the volumeStereo and two-channel sound reproduction Mute Favourite programmes Programme listsSelecting programmes last received To sort the channels To delete a programme To add a programme manually Incorrect parameter Setting up a satellite Satellites add/removeTo enter a name To remove satellite Password Factory settingEntering a password Parental lock Same accounts for transponder exchange Backup operation Operation from the front panel Setting system parameters System parameters Summer time TV typePicture format Screen OSD colour OSD trans 10,7…11,7 GHz Low-band Low-band / analogue transmis Sion Installation menuLNB configuration Changing the oscillator frequency Antenna settings Satellite search TP set-up/search Transponder selection Error DiSEqC UFO Set-up KHz signal High/Low Pos. A/B Tone Burst Tone burst Opt. A/B Factory setting Recording Playback „Display info Transferring operating software PreparationTransferring programme lists Technical features Technical data Technical annex Accessories Scart socket assignments Connection examples Connection arrangement VHF/UHF VCR LNB Short technical lexicon DiSEqC componentsEb/No ratio Programme package Symbol rate TransponderVideo bit rate Viterbirate DiSEqC menu ServiceSatellite 998.6246/1001/ZWT/ Subject to technical changes