Kathrein UFD 505 manual TP set-up/search, Transponder selection

Installation menu

existing programme list.

The signal quality and the search progress are indicated during the search.

The message appears at the end of the search.

The search is complete

Press (OK) button

All new programmes are added to the

You can interrupt the search by pressing the ￿button.

TP set-up/search

In this menu you can scan through the transponders for specific programmes, e.g. when new programmes are offered in the package of a specific broadcaster. You can obtain this information from SAT 1 teletext or corresponding TV and satellite magazines as well as from the Internet.

Press ￿to open the menu.

Transponder selection

The following settings are now possible (select positions with ￿￿):

- Required satellite with ￿or ￿, the transponder frequency with numerical buttons,

- the polarisation with ￿or ￿button,

- the symbol rate with the numerical buttons and

- search mode for free-to-air or free and

encrypted programmes with the ￿or ￿ button.

The bar diagram indicates the relative signal strength and is not an indication for the quality of the receiving system.

Start the search by pressing ￿in the "search" position.

The shown on-screen display appears as the result of the search.

Exit this menu by pressing ￿and go to the previously highlighted programme (here ZDF).

Press the ￿to return again to this menu to continue searching for further trans- ponders.

38