Using the timer
Using the play/record timer
PLAY/
REC
To change the timer
Press [rPLAY/rREC] to select the desired timer.
Every time the button is pressed the setting changes as follows.
PLAY |
|
|
| REC | |||
| |||||||
|
| (OFF) |
|
|
| ||
|
|
| |||||
|
|
|
|
|
|
|
|
To check settings
While the unit is on and the “rPLAY” (or “rREC”) indicator is on, press [CLOCK/TIMER] so “rPLAY” (or “rREC”) appears on the display.
Two seconds after “rPLAY” (or “rREC”) appear, the settings are displayed in the following order:
• For play timer | • For record timer | ||
1 | Play start time | 1 | Recording start time |
2 | Play finish time | 2 | Recording finish time |
3 | Play source | 3 | Recording source |
4Playback volume
You can check the settings even when the system is OFF by pressing [CLOCK/TIMER] twice.
|
|
| To enjoy the desired source after the timer setting is completed | ||
|
|
| The volume level (for play timer) and music source are stored in the | ||
others |
| timer memory and the timer will start in these preset conditions. | |||
| However, the Disc numbers and reverse mode (for | ||||
|
|
| |||
|
|
| get stored in the timer memory. | ||
|
| ||||
|
|
| 1. After step 4, start playing the desired source. | ||
and |
|
| 2. Reset the Disc numbers and reverse mode (for | ||
|
|
| have changed any of them, confirm that a Disc or cassette is | ||
|
|
|
| ||
Timer |
|
|
| inserted, then press [f/7, POWER] to put the unit on standby. | |
|
|
|
|
| |
|
| Notes |
| ||
|
|
| • | If you switch the system to the standby mode while the play/record | |
|
|
| • | timer is functioning, the OFF time setting will not be activated. | |
|
|
| If “AUX 1/2” |
selected as the source, when the timer comes ON, the system will turn ON and will engage “AUX 1/2”
34
Using the sleep timer
by remote control only
This timer turns your system OFF at the set time (Max. 2 hours, settable at
Preparation
Switch on the power.
The figure shows how to set the system to standby mode after 30 minutes.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
SLEEP 30 SLEEP 60 SLEEP 90 SLEEP 120 SLEEP OFF
The system is turned off after the set time has elapsed.
To cancel the sleep timer:
Press [SLEEP] to select “SLEEP OFF”.
To confirm the remaining time: (only while system is ON)
Press [SLEEP].
To change the time remaining during operation:
Press [SLEEP] to show the remaining time then press [SLEEP] to select the desired time.
Notes
•The sleep timer turns OFF automatically the moment you attempt to
•The sleep timer can be used in combination with the play/record timer.
The sleep timer always has priority. Be sure not to overlap timer settings.
RQT5769