A |
R6, AA, |
B |
Remote control signal sensor
30˚ | 30˚ | |
Transmission | About 7 meters in front of | |
window | ||
the signal sensor | ||
|
Concerning the remote control
A Battery installation
Insert the batteries observing the correct polarities (e, d).
Use of batteries
• Align the poles (+ and |
| |
• | Do not mix old and new batteries or different types of batteries. | using |
• | Do not recharge ordinary dry cell batteries. | |
• Do not heat or disassemble the batteries. Do not allow them to |
| |
• | contact flame or water. | Before |
Remove the batteries if the unit is not to be used for a long time. |
• Do not keep together with metallic objects such as necklaces.
• Do not use rechargeable type batteries.
• Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part of your body.
B Correct method of use
Operation notes
•Do not place obstacles between the remote control signal sensor and remote control unit.
•Do not expose the remote control signal sensor to direct sunlight or to the bright light of a fluorescent light.
•Take care to keep the remote control signal sensor and end of the remote control unit free from dust.
•If this system is installed in a rack with glass doors, the glass doors’ thickness or color might make it necessary to use the remote control a shorter distance from the system.
To prevent damage
•Never place heavy items on top of the unit.
•Do not disassemble or reconstruct the unit.
•Do not spill water or other liquids into the unit.
9
RQT5769