Panasonic SC-AK62, SC-AK77 manual Recording from compact discs, If the tape finishes before the CD

									1
		3
		2							5
									4
	1
					DISC
	2
	3	CD 1	CD 2	CD 3	CD 4		CD 5
operations					DISC
	4
Recording					DISC
	5			SC-AK77
					DISC
					2 REC
				SC-AK66			SC-AK62
									FLAT
					DISC
	A Front side			1	2		3	4	5
		Reverse side		9	8	7		6	5

The interrupted track is re-recorded in its entirety on the reverse side.

26

Recording from compact discs

To record special CDs and tracks

(CD Manager function)

This function makes it easier for you to select special CDs and tracks from amongst those loaded in the player.

Preparation

Press [cDECK 2 OPEN] and insert the tape. Wind up the leader tape so recording can begin immediately.

Press [CD].

Press [CD MANAGER] to select the desired mode.

Every time you press the button:

1-TRACK 1-DISC 1-ALL

	NORMAL
	(OFF)
1-TRACK:	Only one particular track is recorded.
1-DISC:	The tracks on only one particular disc are recorded.
1-ALL:	The same track numbers on each of the CDs are
	recorded in succession.

(NORMAL: The original display is restored in about 3 seconds.)

Press [(CD 1) ~ (CD 5)] to select the disc you want. Note

This step is not required if 1-ALL was selected in step 2.

Press [g/(] or [)/f] to select the desired track.

Note

This step is not required if 1-DISC was selected in step 2.

Press [a REC/STOP] to start recording.

To stop recording

•To add a 4 second silent interval before stopping Press [L]. The CD will stop automatically too.

•To stop recording without a silent interval

Press [a REC/STOP]. The CD will stop automatically too.

SC-AK77

•A While recording, if a track is cut off in the middle at the end of the front side, it is re-recorded from the beginning, on the reverse side.

•At the end of the reverse side, recording stops and the current track will be interrupted.

SC-AK66 SC-AK62

If the tape finishes before the CD

The CD continues playing. Press [L] to stop it. (CD Manager function will also be canceled.)

RQT5769