1 |
2 |
4 |
3 |
1 |
2 |
3 |
4 |
Setting the time
This is a
This example in the figure shows how to set the time for 4:25 p.m..
Switch on the power.
Press [CLOCK/TIMER] to select “CLOCK”.
Every time you press the button:
CLOCK PLAY REC
Previous display
(within 7 seconds or so)
Press [TUNE/TIME ADJ (3) or (4)] to show the present time.
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you set the time.
To display the time when system is ON
Press [CLOCK/TIMER] to select “CLOCK”.
To display the time when system is OFF
Press [CLOCK/TIMER].
The time will be displayed for about 5 seconds and then the display will return to whatever was previously displayed.
Note
The clock may lose or gain some time over a period. Readjust if necessary.
Before using
13
RQT5769