1 |
1 |
Enjoying sound with DOLBY PRO
LOGIC (DOLBY PRO LOGIC)
To playback a Dolby Surround source with
Dolby Pro Logic
Press [p PL].
The button lights.
Playback a Dolby Surround source.
To turn off DOLBY PRO LOGIC
Press [p PL].
The button light goes out.
Manufactured under license from Dolby Laboratories.
“Dolby”, the
To adjust the volume of each speaker
Preparation: Press [p PL] to turn the light on.
Sit in the normal listening position and make the adjustments with the remote control.
1Press [TEST].
A test signal is output.
The speaker outputting the test signal is displayed while the test is running.
Lch: Front speaker (Left)
Cch: Center speaker
Rch: Front speaker (Right)
Sch: Surround speakers
2Press [VOLUME (– or +)].
Set the volume to the normal listening level.
The following steps are for setting the output level of the front speakers and the other speakers to the same listening level.
3 Press [CH SELECT].
Select the speaker channel to be adjusted. |
|
| ||
4 Press [CH LEVEL (– or +)]. |
|
| ||
Adjust the output level |
|
| ||
operations | ||||
+ : Increases the output level | ||||
|
| |||
|
| |||
Repeat steps 3 and 4 to adjust the level accordingly. |
|
| ||
|
|
|
| |
To stop the test signal |
| fieldquality/soundSound | ||
Press [TEST] again. |
| |||
|
| |||
|
|
|
| |
|
|
|
| |
|
|
|
| |
31
RQT5769
