1
3 | 5 |
22
| 4 | 4 |
1 |
|
|
2 |
|
|
|
| Front side |
3 | ||
4 |
| |
|
| Tape direction |
| ||
5 |
|
|
A |
| Deck in use |
|
| |
|
| 2 |
Listening to tapes
You can use either deck 1 or deck 2 for tape playback.
The unit can play normal, high and metal position tapes.
It identifies the type automatically.
Use normal position tapes.
High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes.
Press [TAPE, DECK 1/2].
The unit will come on automatically.
If the unit was off and a cassette was loaded, play will start automatically (One touch play function).
Press [c DECK 1 OPEN] or [c DECK 2 OPEN] and insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
Press [REV MODE] to select the reverse mode.
Every time you press the button:
:One side is played.
:Both sides are played.
:Both sides are played 8 times each.
| To listen to 2 tapes consecutively |
|
| |||||
| Load a tape into each deck and select “ | ”. Both tapes will |
| |||||
| be played 8 times each. |
|
| |||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| operations | |
|
|
|
|
|
| |||
| Press [// J] or |
| ||||||
|
|
| ||||||
| deck | |||||||
: The forward side (front side) will play. | ||||||||
| [// J] | : The reverse side will play. |
| |||||
|
|
| ||||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |||
| Press |
|
| |||||
| Cassette | |||||||
| One side is played, then playback stops automatically. | |||||||
| To play on the other side of the tape, turn the tape over and | |||||||
|
|
press
•Playback is momentarily interrupted while playing back tapes, if you open the other deck.
•Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.
•Tape slack can get caught up in the mechanism and should be taken up before the tape is played.
•
•
21
RQT5769