1 |
3 |
4 |
2
1
2
3
2
4
12 REC
Tape direction of the tape you are recording onto
FLAT
Tape-to-tape recording
The recording level will be recorded as it is on the tape being played back.
Press [TAPE, DECK 1/2].
Press [c OPEN] on both decks and insert the tapes.
For playback: Into deck 1
For recording: Into deck 2
Close the holders by hand.
Press [REV MODE] to select the reverse mode.
Every time you press the button:
:One side records only.
, :Both sides record (front → reverse).
“ ” automatically changes to “” when [TAPE EDIT] is
pressed.
Press [TAPE EDIT] to start recording.
To stop recording
Press [L].
Both decks will stop.
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want to start recording.
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1.Press [TAPE, DECK 1/2] and select tape deck 2.
2.Press [/] and immediately thereafter [L]. The tape direction will be shown as “4”.
Turn the tape over and press [TAPE EDIT]. Recording
23
RQT5769