![](/images/new-backgrounds/1312872/31287267x1.webp)
34 EN | TIMER RECORDING |
VCR Plus+®
Timer
Programing
●Turn on the VCR and the TV, and select the AV mode on the TV.
●Set the VCR/TV/CABLE/DBS selector on the Remote to “VCR”.
POWER 1
Timer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 24 timer recording programs can be made using VCR Plus+ timer programing or Express timer programing method ( pg. 38) as far as a year in advance.
The VCR Plus+ timer programing system eliminates the need to input channel, date, start and stop time data when programing timer recording settings. Simply key in the PlusCode number for the TV broadcast you wish to record and the VCR’s timer will be automatically programed. (The PlusCode programing numbers are the numbers next to the program in most TV listing.)
1 Load a cassette
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR.
●The VCR turns on, and the counter is reset, automatically.
IN |
| 2 |
| + | |
|
|
TIMER ()
Access VCR Plus+ screen
Press PROGRAM on the Remote.
●The clock must be set to access the
VCR Plus+ screen.
If you have not set PRESS NUMBER KEYS
the clock, the Main Menu screen
EXIT START STOP DATE CH PRESS
![](/images/new-backgrounds/1312872/31287267xi13.webp)
POWER
VCR CABLE
TV /DBS
appears after an error message is displayed. Refer to page 10 for the clock setting procedure.
3 |
Enter PlusCode number
2 | 8 |
5 | TIMER ( ) |
| |
3 | 6 |
| |
DAILY | WEEKLY |
Press the appropriate Number keys to input the PlusCode number printed in the TV listings for the TV broadcast you wish to record, then press OK.
TIMER PROGRAM
PLUSCODE NUMBER SET
1 2 3 4 5
SET
PROG.
PRESS NUMBER KEYS
EXIT START STOP DATE CH PRESS
34
BACK | 7 |
|
Then;
If the Guide Channel Set screen appears
— go to step 4.
If the VCR Plus+ Program screen appears
—go to step 5.
●To make corrections, press CANCEL and input the correct PlusCode number.
●If an incorrect PlusCode number or the one for a broadcast already finished has been inputted,
“PLUSCODE NO. ERROR CONFIRM PLUSCODE NO. THEN RETRY” is displayed for about 5 seconds, then the VCR Plus+ screen reappears.
34 | 1/22/3, 4:39 PM |