Marantz MV8300_U1B manual Turn on DBS receiver, Access DBS Receiver Set screen, Input CH

EN 19

●Turn on the VCR and the TV, and select the AV mode on the TV.

●Set the VCR/TV/CABLE/DBS selector on the Remote to “VCR”.

VCR CABLE

TV /DBS

2 34

Setting DBS receiver input channel & brand

After installation, set the DBS receiver’s input channel and its brand correctly; otherwise, the Controller cannot work correctly.

	Turn on DBS receiver
1 Select a channel other than channel 100 or 205
	on your DBS receiver.
	Access Main Menu screen on VCR
2 Press MENU.
3	Access DBS Receiver Set screen
	1 Press @ # to move FUNCTION SET UP TUNER SET UP INITIAL SET UP

the arrow to	TUNER SETCABLE SET UP	DBS SET UP
“TUNER SET UP”,
	INPUT CH	OFF
		40
then press fi or	BRAND
	TEST MODE
OK.

2Press @ # to move

the arrow to “DBS	MENU	OK	SELECT WITH ARROW KEYS
	EXIT	SELECT	THEN PRESS [OK]
SET UP”, then
press fi or OK.

4Select DBS receiver input channel

Press %fi to move	FUNCTION SET UP	TUNER SET UP INITIAL SET UP
the arrow to	DBS SET UP
“INPUT CH”.	INPUT CH		OFF
Your selection	BRAND		40
	TEST MODE
depends on how
your DBS receiver	MENU	OK	SELECT WITH ARROW KEYS
is connected to
	EXIT	SELECT	THEN PRESS [OK]

your VCR.

●If your DBS receiver is connected to your VCR’s ANTENNA IN terminal on the rear panel

Press @ # until the channel number representing the DBS receiver’s output (ON CH3 or ON CH4) appears on the screen.

●If your DBS receiver is connected to your VCR’s AUDIO/VIDEO IN connectors on the front panel Press @ # until “ON F-1” appears on the screen.

●If your DBS receiver is connected to your VCR’s AUDIO/VIDEO IN (L-1) or AUDIO/VIDEO IN (L-2) connectors on the rear panel

Press @ # until “ON L-1” or “ON L-2” appears on the screen.

●If you do not use a DBS receiver

Press @ # until “OFF” appears on the screen.

CONTINUED ON NEXT PAGE \

HM-DH40000U-EN15-20 19 1/22/3, 4:37 PM