Marantz MV8300_U1B manual Setting clock semiautomatically, Access Auto Clock Set screen

EN 11

Setting clock semiautomatically

— Semiauto Clock Set

You can change the host channel/D.S.T. /time zone setting manually.

First follow steps 1 to 2 on page 10, then go to the following steps.

3Access Auto Clock Set screen

Press %fi to move	FUNCTION SET UP	TUNER SET UP INITIAL SET UP
the arrow to “AUTO	CLOCK SET		GUIDE CHANNEL	OTHER
CLOCK SET”, then	AUTO CLOCK SET
press OK.	MANUAL CLOCK SET
	AUTO CLOCK			ON
	MENU	OK SELECT WITH ARROW KEYS
	EXIT	SELECT	THEN PRESS [OK]

Then;

To select the host channel — go to step 4. To select the D.S.T. mode — go to step 5. To select the time zone — go to step 6.

NOTE:

The time set previously will be erased when “AUTO CLOCK SET” is selected.

5Select D.S.T. mode

You have three choices:

AUTO– Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time*)

ON– Adjustment will be made by the built-in clock itself.

OFF– Select when Daylight Saving Time does not apply to you.

Press %fi to move the arrow to “D.S.T.”, then press @ # repeatedly until the desired setting is selected.

6Select time zone

You can select the time zone automatically or manually.

Press %fi to move the arrow to “TIME ZONE”, press @ # repeatedly until “AUTO” or the desired time zone is selected.

Each time you press the button, the time zone changes as follows:

O AUTO O ATLANTIC O EASTERN

4Select host channel

You can either select “AUTO” or enter a PBS channel number. Press %fi to move the arrow to “HOST CH”, then press @ # until “AUTO” or the desired PBS channel number is selected.

FUNCTION SET UP	TUNER SET UP		INITIAL SET UP
AUTO CLOCK SET		TIME – –:– – AM DATE 1/1 (WED) 2003
HOST CH		[TV]	AUTO
D.S.T			AUTO
TIME ZONE			AUTO
RETURN
MENU	OK	SELECT WITH ARROW KEYS
EXIT	SELECT	THEN PRESS [OK]

O CENTRAL O MOUNTAIN O PACIFIC

O ALASKA O HAWAII O (back to the beginning)

NOTE:

If an incorrect clock time is displayed by the Plug & Play setting, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected “AUTO” for the host channel in step 4, be sure to select the correct time zone manually.

NOTE:

Some PBS channels do not transmit clock setting data.

* Auto Daylight Saving Time

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.

Press MENU.

IMPORTANT

Turn off the VCR after performing Semiauto Clock Set. “Auto” will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.

HM-DH40000U-EN10-14 11 1/22/3, 4:36 PM