![](/images/new-backgrounds/1312872/31287243x1.webp)
22 EN | BASIC PLAYBACK AND RECORDING (cont.) |
Basic
A Checking tape position
Playback
Features
● Turn on the VCR and the TV, and select the AV |
The tape position indicator appears on the screen in the following cases:
●When you change the VCR operation mode from the stop mode to fast forward or rewind mode.
●When you perform an Index Search ( pg. 24).
B | E |
mode on the TV. |
● Set the VCR/TV/CABLE/DBS selector on the |
Remote to “VCR”. |
B
IN |
+ |
The position of “ ” in relation to “B” (Beginning) or “E” (End) shows you where you are on the tape.
NOTES:
●“SUPERIMPOSE” must be set to “ON”, or the indicator will not appear ( pg. 57).
●It may take a few seconds for the tape position indicator to be displayed.
To reset the time counter, press C. RESET on the Remote. The counter reading becomes “0:00:00”. It is also reset when a tape is inserted.
VCR CABLE TV /DBS
|
| B | Playing back tape repeatedly |
C | |||
|
|
| — Repeat Playback |
|
| You can play back a tape repeatedly (50 times). | |
|
| While playing back a tape, press and hold PLAY ( 3 ) | |
|
| for more than 5 seconds. | |
|
| The play indicator ( # ) on the front display panel starts | |
|
| flashing slowly, and a tape will be played back 50 times. | |
|
| To stop playback, press STOP ( 7 ) on the Remote or | |
|
| STOP/EJECT ( 7/0 ) on the front panel. |
C | NOTE: |
| For a cassette recorded in |
| possible if the cassette was recorded in LS3 or LS5 mode. |
B
D
22 | 1/22/3, 4:37 PM |