Pentax MZ-6 manual Remote Control Shooting Optional, Cancelling the self-timer mode

MZ-6(E)04 D1/045-073 11/8/02 12:00 PM Page 50

wDepress the shutter release button

completely.

The shutter will be released about 12 seconds after the shutter release but- ton is depressed. The audible PCV sig- nal is heard and the rate increases for the last two seconds.

3 Cancelling the self-timer mode

qPress the drive mode button to another setting.

The self-timer mode is cancelled.

Memo

The stop the self-timer operation after it has been activated, press the drive mode button again.

Memo

The audible PCV signal can be stopped ( p.74).

REMOTE CONTROL SHOOTING (OPTIONAL)

If you have purchased the optional wireless remote control, read this section.

The shutter will be released 3 seconds after the remote control's shutter release button is pressed.

qAttach the camera to a tripod.

wPress the drive mode button until

[ ] appears on the LCD panel.

eThe self-timer lamp starts blinking slowly.

rAim the remote control transmitter towards the remote control receiver on the camera, and then press the shutter release button on the remote control.

tThe self-timer lamp blinks rapidly for 3 seconds and then the shutter is released.

yWhen the picture is taken, the self-timer lamp lights for approx.

2 seconds and return to blink slowly.

CAMERA OPERATION

STEP UP ADVANCED OPERATIONS

50 51