Pentax MZ-6 manual Flash Accessories, AF360FGZ

MZ-6(E)06 F2/119-133 11/8/02 12:13 PM Page 120

■FLASH ACCESSORIES

AF360FGZ

TTL auto flash unit with Guide No.

36.Features include slave-sync flash, multiple-flash, and leading/trail- ing curtain-sync flash. High-speed

sync and wireless flash can be used.

AF500FTZ

A TTL Auto Zoom flash with a built-in AF spotbeam and large guide number of 50 in meters (ISO 100). It features the slave sync flash function, multiple flash burst, contrast-control-sync flash, leading/trailing -curtain-sync flash mode.

AF220T

A TTL Auto flash with a guide number of 22 in meters (ISO 100).

AF201SA

An auto flash (not TTL) with the guide number of 20 in meters (ISO 100).

AF140C

TTL macro flash unit with the guide number of 14 in meters (ISO 100).

Off–Camera Shoe Clip CL-10

Enables the AF360FGZ to be used as a wireless flash.

Hot Shoe Adapter F, Extension Cord F5P and Off- Camera-Shoe Adapter

The adapters and cord which allow the external flash to be used off the camera, while maintaining full electric coupling to the cam- era.

ACCESSORIES (OPTIONAL)

■VIEWFINDER, LENS AND CLOSE-UP ACCESSORIES

Magnifier FB

Magnifies the image at the center of the viewfinder.

Refconverter A

Right angle finder which attaches to the grooves on both sides of the viewfinder. The viewfinder magnification is able to switch from 1X to 2X.

Memo

While attached, it may obstruct the opening/closing of the camera back. First detach the Refconverter A before opening/closing the camera back.

AF Adapter 1.7X
An adapter for autofocus photography using a non-autofocus lens
with a maximum aperture of f/2.8 or larger.	APPENDIX
Filters
Skylight, Cloudy, UV, Y2, O2, R2 and Circular Polarizing Filter are
available in sizes of 49mm, 52mm, 67mm and 77mm.
Memo

•Since the camera’s autofocus mechanism uses a semi-transparent mirror, using a non-circular polarizing filter may throw off the autofocus- ing and exposure metering precision. When using autofocus, a circular polarizing filter is recommended instead. This will also maintain expo- sure metering precision.

•When you attach/detach Adapter K (for the 645 lens) to the camera, the adapter’s screw should not contact the camera body. If necessary, change the screw’s position.

•The hot shoe cover attached to the hot shoe unit is used exclusively with the MZ-6/ZX-6 and MZ-7/ZS-7. The use of other hot shoe covers will prevent operation of the auto pop-up function of the flash.

Auto Extension Tube K

A set of three tubes. A close-up accessory placed between cam- era and lens. Supports automatic aperture and metering with maximum aperture.

120 121