Pentax MZ-6 Attaching a Lens, Remove the body mount cap and rear lens cap, Memo Handling the Lens

MZ-6(E)02 B/011-020 11/8/02 11:55 AM Page 14

Step 3 Attaching a Lens

1 Remove the body mount cap and rear lens cap.

Memo

The body mount cap protects the inside of the camera from dust and scratches upon factory shipment. For long-term camera storage, the optional accessory “Body Mount Cap K” is also available.

2 Align the red dots on the lens and camera while attaching the lens to the camera, then turn the lens clockwise until it clicks in place.

Memo

•After attaching the lens, try and turn the lens counterclockwise to make sure it is locked in place.

	BEFORE TAKING PICTURES
3	As shown in the illustration, remove the front lens cap.	SET
		UP
		THINGS TO DO

Memo Handling the Lens

•To detach the lens, hold down the lens unlock button and turn the lens counterclockwise.

•We assume no responsibility nor liability for damages resulting from the use of lenses made by other manufacturers.

•Use a soft, dry cloth to keep the electrical contacts on the body mount and lens mount clean. Dirt or corrosion on the contacts can cause problems with the electrical system.

14 15