Pentax MZ-6 manual SELF-TIMER Mode, Setting the multi-exposure mode, Using the multi-exposure mode

MZ-6(E)04 D1/045-073 11/8/02 12:00 PM Page 48

1 Setting the multi-exposure mode

q Turn the main switch to ON.

wPress the drive mode button until [ ] appears on the LCD panel.

The frame counter will blink.

2 Using the multi-exposure mode

qTake the first picture.

The frame counter and [ ] on the LCD panel blink.

wTake the second picture.

The frame counter stops blinking and film is advanced to next frame then return to single frame drive mode [ ].

Memo

To exposed the third shot or more, press the drive button until [ ] appears after repeating step 1.

Memo

The multi-exposure mode remains in effect even after the main switch is turned [OFF]. To cancel the multi-expo- sure mode, remove the batteries once and load again.

CAMERA OPERATION

SELF-TIMER MODE

After you pressing the shutter release button, the picture will be taken about 12 sec. later. Use the self-timer when you want to be in the picture.

1 Setting the self-timer mode

qTurn the main switch to ON.		STEPUP
wPress the drive mode button until [ ]
appears on the LCD panel.		ADVANCED
Memo	Preventing stray light from entering the eyepiece	OPERATIONS

Underexposure may occur if light enters the viewfinder during self-timer operation on auto picture mode and 6 picture modes. If you intend to move away from the viewfinder, attach the supplied finder cap or use AE lock function ( p.73).

Detaching Eyecup Attaching the finder cap

2 Using the self-timer mode

qDepress the shutter release button halfway down to focus the subject.

48 49